John's Geekblog

Home » Archives » April 2007 » TADD distribution amps on line

[Previous entry: "GPS antenna system total delay"] [Next entry: "LORAN-C Timing"]

04/01/2007: "TADD distribution amps on line"


Thanks to nice metalwork by Bruce, KA8EDE, I have two TADD-1s mounted in a 1U chassis to serve as primary distribution in my measurement rack. They are both adjusted for 0 dB gain at 5 MHz (using a reference signal at about +11 dBm). At 10MHz with a +12dBm reference signal, they appear to have perhaps 0.2 dB gain.