[mvarbb] FW: WB8VUU & KA8HQJ Equipment For Sale [- Complete Listing]

w8lly at sbcglobal.net w8lly at sbcglobal.net
Mon May 5 09:59:49 EDT 2008


-----Original Message-----
From: Nelson DiGennaro (WB8VUU) [mailto:wb8vuu at arrl.net] 
Sent: Monday, May 05, 2008 1:42 AM
To: W8LLY at ARRL.net
Subject: WB8VUU & KA8HQJ Equipment For Sale [- Complete Listing]

Dear Amateur Radio Friends,

Shown below is the complete detailed descriptions of everything for sale by
WB8VUU & KA8HQJ, including what is included with each item (and we can send
pictures of individual items upon request).  If anyone has any questions or
just want to get an item email us at mailto:wb8vuu at arrl.net.  Included is
our asking prices and sales are FIRST COME - FIRST PAYS - GETS THE ITEM.
All items are to be PAID IN CASH and we prefer to arrange local pick up or
as a last resort items can be shipped at additional cost to the new lucky
owner ;-).

TNX for your interest in our "gems"!

    Paula & Nelson DiGennaro
KA8HQJ at arrl.net & WB8VUU at arrl.net
      (Home Town: Dayton OH)

========= BEGIN List ========= 

+++++ HF TOWER SYSTEM/COMPONENTS +++++
+++++ (Installed April 2002/Taken Down April 2008) +++++

_ American GCS Series Tower (5 Rung, 16 gauge)	[$400.00]
Includes: 59+ Feet plus Nuts and Bolts; 
  - 1@ GT-3 1-7/8"O.D. Top Section
  - 4@ GCS-1 10’ mid-sections
  - 1@ GCS-1 10' mid-section “cut” approx. 9’-8” (cut at bottom suitable for
use as a base section set in concrete 

_ Philly Strand Guy Cable System – 2-Levels	[$550.00]
Description: Non-conductive 2100 lb. Philly Strand Guy Cable System with
galvanized Phillystran Guy cable grip/loop hardware on each end.  Mates with
Rohn GB25D Guy Bracket on tower ends.  Ground ends have cable grip attached
to heavy duty ½” galvanized turnbuckle.  
Includes: 
  - Top Set 3 Guy Cables 63'-6" +3', 66'-6" +3' and 69'-6" +3' (+3' = slack
guy cable beyond the gripper) 
  - Lower Set 3 Guy Cables 47' +1', 52' +3' and 56'-6" +3'
  - Rohn GB25D Guy Brackets Qty-2 (loop rings are installed on guy cables)

_ Antenna Rotor System & 80’ Control Cable	[$500.00]
Description: Hy-Gain HAM IV Rotor & control box and 80 feet of 8-conductor
rotor control cable.
=================================== [Sub-Total $1,450.00]

_ Tower Side Arm (Galvanized) - 7 Foot	[$25.00]


+++++ TRANSCEIVERS +++++

_ 2M Mobile-Portable Transceiver, Spec-Comm SC560	[$20.00]
**NOT OPERATING** Great for a new Ham's bench project.  
Features: 5W, Six (6) Channel Crystal controlled Xcvr, covers 2MHz between
143-149 MHz.  
Includes: 
  - Microphone,
  - 16-Key Touch Tone Pad
  - 110 VAC Snap-On Power Supply 
  - 25W Snap-On Amplifier 
  - Crystal pairs (installed) for simplex (S) on 144.97, 144.99, 145.01,
145.03, 145.05 & 145.07 and 
  - Crystal pairs (not installed) pairs for 146.46(S), 146.52(S),
146.64(-),  146.82(-), 146.91(-), 146.94(-)  and 147.51(S)
  - Cables for interfacing to Pac-Comm Tiny-2 TNC  
  - Manual & Schematics 
  
_ 2M Mobile Transceiver, Alinco DR-130T	[$100.00]
Features: 
  - Tx 144-148/Rx 136-174
  - Power (H/L) 50W/5W
  - 20 Memories plus CALL Channel
  - 50 CTCSS (Encode only)
Includes:
  - Microphone w/ 16 Key DTMF Pad
  - MB-130 (Mounting Bracket)
  - Manual and schematic 

_ 2M/70cm Mobile Transceiver, YEASU FT-4700RH	[$125.00]
Features:
  - Power (H/L): VHF 50W/5W, UHF 40W/5W
  - VHF: Tx 140-150/Rx 140-174, UHF: 430-450
  - 7 Memories and L/U sub-band scan limit memories each on both bands plus 
  - CALL memories on both bands 
  - Priority Channel Monitoring 
  - 42 CTCSS frequencies 
Includes:
  - Optional - FTS-8 CTCSS Encode/Decode installed on both bands
  - Microphone w/ 16 Key DTMF Pad and Up/Down buttons
  - Detachable Front Panel w/ Optional - YSK-4700 Trunk Mounting Kit (cable,
panel & front panel mounting bracket)
  - MMB-27 (Mounting Bracket)
  - Manual and schematic

_ 2M/70cm Mobile Transceiver, Kenwood TM-732A	[$225.00]
Features: 
  - Power (H/L): VHF 50W/5W, UHF 40W/5W
  - VHF: Tx/Rx 144-148, UHF: 438-450
  - 50 Memories (max. 64 depending on usage)
  - 38 CTCSS Tone Frequencies 
Includes:
  - Microphone w/ 16 Key DTMF Pad and Up/Down buttons
  - Detachable Front Panel w/ YSK-4700 Trunk Mounting Kit
  - Manual & Schematics

_ HF Base Transceiver, ICOM IC-751	[$350.00] 
Description:  HF transceiver, 100W, All bands , All mode:
LSB/USB/CW/AM/FM/FSK, All Solid State Synthesized, Digital Frequency
Readout, General Coverage 100 KHz - 30 MHz.  
Features:
  - 1.8MHz to 29.7MHz, including 10MHz, 18MHz, and 24MHz WARC Bands
  - 32 Memories store mode, Ham/Gen Coverage mode, and frequency
  - Dual VFOs for split DX operation
  - SSB and FM Squelch
  - Full Function Metering; Vc, Ic, Compression, ALC, Po, and SWR (w/ SET
capability)
  - Much much more!
Includes:
  - Optional IC-PS35 (internal power supply) installed
  - Original Microphone (IC-HM32) w/ Up/Dn buttons
  - AC Power Cord
  - Original Instruction Manual, Schematic and Board Layout diagrams


+++++ ANTENNAS +++++

_ 2M Mobile/Antenna, OMNI-J	[$10.00]
Description: 144 MHz Omni directional J-Pole design 

_ 2M/70cm Base Antenna, Diamond X50A	[$85.00]
Description: 4.5/7.2 dB gain, 200 W max., 5.6 feet, UHF connector.  
Features: 3-1/4 wave/3-5/8 wave, wide band, single section fiberglass
construction, stainless steel hardware, 135 MPH wind rating, DC grounded.

_ 2M/70cm Mobile Antenna + Mount + Cable, Diamond (NR770HA + K400 + C213)
[$145.00]
Includes: 
- NR770HA Dual-Band Antenna
- K400 Trunk-Lip mount
- C213 13.5 foot RG-316 Teflon coax SO-239 to PL-259

_ 20-15-10M Tri-Band Beam Antenna, Cushcraft A-4S	[$500.00]
Description: A4S Specifications Frequency: 10, 15 and 20 meters, Elements:
4, Forward Gain: 8.9 dB Front To Back Ratio: 25, VSWR 2:1, Bandwidth: 500+
kHz. Power: 2000 watts CW, Longest Element: 32 Ft. (9.75 m), Turning Radius:
15.5 Ft. (4.72 m), Boom Length: 18.5 Ft. (5.48 m), Boom Diameter: 2 inches
(5.1 cm), Wind Load: 5.5 sq. feet, Connector: UHF, Weight: 37 Lbs 16.8 kg) –
Partially disassembled and marked for ease of reassembly.  This antenna has
been in service only since April 2002 and was assembled with NOALUX to
prevent corrosion.
Includes:  
  - All Stainless Steel hardware
  - Package of replacement Trap End Caps
  - Instructions
  
_ HF Mobile All-Band HF Screw Driver Antenna, High Sierra HS-1500 (White)
[$300.00]
Features: 
  - Continuous tuning from 3.5MHz to 30MHz, no gaps, no harmonic operation
on 15M and 10M
  - 50-54MHz operation with whip removed
  - 800 Watt power rating w/ typical SWR <1.5:1
  - Mount to a suitable flat plate using the "isolated" center-feed
bolt/tapped base
  - Height: 4.5 feet (retracted w/o whip) to 12 feet (extended w/ whip)
  - Weight: 6 pounds
NOTE: Antenna was cleaned, polished, reassembled and tested by High Sierra
in 2002.  Requires a replacement Weather Shield (available from HS for
$29.00).
Includes:
  - Remote Control Panel (built to instructions in the Instruction Manual)
  - "Conjugate Matching" coil, presumably for 6M Operation (details covered
in Instruction Manual)
  - Standard Whip (3.5 to 30 MHz) w/ Quick Disconnect
  - Extension Whip (2.6 to 17 MHz) w/ Quick Disconnect
  - Extensive Instruction Manual and additional literature on mounting for
mobile operation
  - Spare (New) Stainless Steel coil contact spring 


+++++ COAX CABLE +++++

_ NEW (still on spool) RG-213/U, R&L #2213 Low Loss "4-Strand Center" -- 154
Feet @ .55/ft	[$87.00]

_ Used (6 years only) RG-213/U, R&L #2213 Low Loss "4-Strand Center" -- 70
Feet @ .55/ft	[$38.00]

_ NEW (still on spool) Belden 9913F, High Flex - Low Loss (RG-8 Type) -- 74
Feet @ .60/ft	[$44.00]
- Belden 9913/9913F Foil and Braid Shield - 2M loss of 1.6 dB and on 70cm
2.8 dB

_ Used (6 years only) Belden 9913F, High Flex - Low Loss (RG-8 Type) -- 74
Feet @ .55/ft	[$40.00]
- Belden 9913/9913F Foil and Braid Shield - 2M loss of 1.6 dB and on 70cm
2.8 dB

_ Used (6 years only) RG-8A/U, -- 82 Feet @ .15/ft	[$37.00]

_ Used (6 years only) RG-58A/U, -- 84 Feet @ .45/ft	[$12.00]

_ NEW in Box RG6/U w/ molded Outdoor "F" connectors (Radio Shack P/N
15-1549) -- 100 Feet	[$20.00]

_ NEW RG6/U 1.8GHz Digital Satellite Coax w/ 17 Ga Gnd & Outdoor "F"
connectors -- 75 Feet	[$20.00]


+++++ MISCELLANEOUS +++++

_ Dummy Load (Dry), MFJ-260	[$30.00]
Description:  The MFJ-260 Dummy load is a dry, air cooled, resistive dummy
load. This resistor load is capable of dissipating RF power without the bulk
or mess of oil or other coolants. It is capable of handling up to 300 Watts
for a short period of time. For added convenience a derating curve is shown
below and on the end plate of the dummy load. 
Features:
  - SO-239 Connector
  - Measures 8" L x 2.5" W x 2.5" H
  - Weight: 13 oz.
Includes:
  - 30" RG-8X coax w/ PL-259 connectors

_ VHF/UHF SWR/Watt Meter, Vectronics PM-30UV	[$85.00]
Features:
  - Selectable Bands 144/220/440 MHz (Range 100 to 500 MHz)
  - 30 and 300 Watt Ranges, 
  - Meter Lamp w/ On/Off Switch
  - 12 Vdc wall adapter (included)
  - Measures 5.3”W x 5.75”D x 3.5”H
  - Weights 1.2 lbs.

_ TVI Filter, B&W Model FL-10/1500	[$20.00]
Features: 
  - 1.5 to 30 MHz up to 1500W)
  - 1500 Watts
  - Cuts of just above 10M (34MHz; max. atten. freq 52MHz; min. atten. 70
db)
  - 50 Ohms impedance
  - SO-239 connectors on each end.  
  - Installation Instructions included
  - Measure (overall) 11L x 2W x 3H

_ Polyphaser (Impulse Suppressor) Lightning Protection IS-50 Series	[see
quantities below]
Features:
  - Broadband dc Blocked Protector
  - <= 0.1dB Insertion Loss
  - VSWR: 1.2:1
  - Multi-strike capability
  - Flange mounting
Quantities:
   - (Qty-2) IS-50UX-C1 (50-220MHz at 375W, 220-700MHz at 125W) NEW IN BOX
[$60.00]
   - (Qty-1) IS-RCT 8-Line Shunt Type Rotor Control Protection NEW IN BOX
[$50.00]

_ VHF Notch Filter, PAR Electronics VHFTN152-158	[$75.00]
Description:  This filter has two steep notches in the 152-153 MHz pager
spectrum. In addition, it has a single notch in the 157-158 MHz pager
spectrum. The VHFTN152-158 may be used with dual band radios (also
transparent at 6 meters) and allows unimpeded reception of the aircraft
band, NOAA weather, etc.
Features: 
  - Dimensions (HWD) 2.5 X 1 X 3
  - Loss @ 6M, 2M, 70cM -0.45dB worst case
  - Power handling:  50W
  - Connector: silver/Teflon® SO-239
Included:  PL-259 to PL-259 barrel connector

_ UHF Notch Filter, PAR Electronics UHFDN450	[$50.00]
Description:  This is a passive "notch filter", that notches out intermod on
the 440 band. 
Features:
  - Dimensions (HWD): 2.5 X 1 X 2
  - Loss @ 6M, 2M, 70cM: -0.9dB worst case
  - Notch depth: Typically >-40 dB
  - Power Handling: 50W
  - Connector: silver/Teflon® SO-239
Included:  PL-259 to PL-259 barrel connector

_ 2M/70cm Duplexer Diamond MX-72D	[$30.00]
Description: Low Pass Filter Port 1.8-30 & 140-150; High Pass Filter Port
400-460MHz, PL259 (no cable).

_ 2M Noise Filter, ANLI NF-2V (144-148 MHz)	[$20.00]
Description: This “Active” (requires 12 Vdc) noise filter helps eliminate
out-of-band pager signals from interfering with amateur radio reception.
Can be connected in-line and does not require switching (automatic) when
transmitting as long as 12 Vdc power is applied.

_ 70 cm Noise Filter, ANLI NF-70U (430-460 MHz)	[$20.00]
Description: This “Active” (requires 12 Vdc) noise filter helps eliminate
out-of-band pager signals from interfering with amateur radio reception.
Can be connected in-line and does not require switching (automatic) when
transmitting as long as 12 Vdc power is applied.

_ Solid State DIP Meter, Heath-Kit HD-1250	[$10.00]
Description:  A Dip Meter can be used to determine the approximate resonant
or operating frequency of either energized or de-energized circuits in the
frequency range between 1.6 and 250 MHz.
Includes: 
  - Coils for 1.6-3.4MHz, 3.2-6.6MHz, 6.3-13MHz, 12.5-26MHz, 25-51MHz,
48-100MHz & 100-250MHz 
  - Carrying Case
  - Assembly Manual-Instructions

_ Standing Wave Bridge & Field Strength Indicator, Archer Cat. No. 21-575
[$10.00]
Includes: Manual-Instructions and telescoping whip antenna.

========= END List ========= 




More information about the mvarbb mailing list