[time-nuts] HP10544a Technical Info needed - Filtering withsingle power source
jmfranke
jmfranke at cox.net
Sat Feb 3 11:16:00 EST 2007
True, the 10811 does not have a switching regulator for the oven circuitry.
John WA4WDL
----- Original Message -----
From: "Jason Rabel" <jason at extremeoverclocking.com>
To: "'Discussion of precise time and frequency measurement'"
<time-nuts at febo.com>
Sent: Saturday, February 03, 2007 11:08 AM
Subject: Re: [time-nuts] HP10544a Technical Info needed - Filtering
withsingle power source
> Bruce (or anyone really)...
>
> I was comparing that schematic for the 10544A with the schematic in the
> 10811 manual. The 10811 has no mention of the inductor/cap combo, so I'm
> guessing it is not needed when using a single power source?
>
> Jason
>
>> Attached GIf file depicts the recommended power supply filtering when
>> the oven circuit shares the same supply as the oscillator.
>>
>> Bruce
>
>
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
More information about the time-nuts
mailing list