[time-nuts] Password recovery on Symmetricom TS3000/3100
donmeis at yahoo.com
Fri Feb 23 13:39:56 EST 2007
You can usually reset the password only through the RS232 Port (NOT Telnet port)
My NTS-200 has a default password for operator of mercury. If you you power down/up the system. the password on the RS232 temporarily reverts to the default. you can log in and use the F100 command to change the password.
On some other systems like the TimServe 2100 the RS232 port does not have a password so you can use the serial port to changes the password.
I could not find a users manual for the timesource 3100 but It probably operates in a similiar manner on it's RS232 port.
I hope that helps
P.S. Are any relation to Christiaan Huygens who is the father of the Pendulum Clock and held the first patent on a pendulum clock in the 17th century.
Date: Fri, 23 Feb 2007 09:42:38 +0100
From: Christophe Huygens
Subject: [time-nuts] Password recovery on Symmetricom TS3000/3100
To: time-nuts at febo.com
Message-ID: <45DEA8FE.8060609 at cs.kuleuven.ac.be>
Content-Type: text/plain; charset="iso-8859-1"
Is there anybody who can assist with PW recovery on
a TimeSource 3100 GPS based PRS. One of our students
changed the default password and now we are
locked-out... I take it it is a jumper on the
board somewhere, but the manual gives no info on this.
Many thanks for any assistance,
Dept. CS, KULeuven
Dept. Computerwetenschappen - K.U.Leuven
No need to miss a message. Get email on-the-go
with Yahoo! Mail for Mobile. Get started.
More information about the time-nuts