[time-nuts] M$-Vi$ta-compliant PC RTC clock card?

Robert Atkinson robert.atkinson at genetix.com
Thu Sep 20 07:30:28 EDT 2007


Hi Nigel,
The ClockBlock is more suited to the main processor clock as it's only
specified down to a few hundred kilohertz. It would be OK with a
post-scaler though.

Robert G8RPI.

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of GandalfG8 at aol.com
Sent: 20 September 2007 11:49
To: time-nuts at febo.com
Subject: Re: [time-nuts] M$-Vi$ta-compliant PC RTC clock card?

); SAEximRunCond expanded to false
Errors-To: time-nuts-bounces+robert.atkinson=genetix.com at febo.com RETRY

 
In a message dated 20/09/2007 08:24:18 GMT Daylight Time,  
robert.atkinson at genetix.com writes:

Being a  hardware kind of guy, my approach would be a little different.
Why not  remove the 32.768kHz crystal and feed the existing RTC with
32.768kHz  divided down from a decent oscillator?
Hey, I just thought, maybe there is  a market here.



Maybe there is:-)......
 
_http://www.tapr.org/kits_clock-block.html_ 
(http://www.tapr.org/kits_clock-block.html) 
 
regards
 
Nigel
GM8PZR



   
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


--------------------------------------------------------




Genetix Limited - Queensway, New Milton, Hampshire, BH25 5NN  Registered in England No. 2660050   www.genetix.com 
Any opinions expressed in this email are those of the individual and not necessarily Genetix Ltd (Genetix) or any company associated with it. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use is strictly prohibited. If you have received this email in error please notify Genetix by telephone on +44 (0)1425 624600.
The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving Genetix network. Genetix will not be liable for direct, special, indirect or consequential damages as a result of any virus being passed on, or arising from alteration of the contents of this message by a third party.
--------------------------------------------------------



More information about the time-nuts mailing list