[time-nuts] Interface boards for timing peripherals (was: 5 MHz 1PPS...)

[christopher hoover]

John Miles wrote:
> Has anyone tried out one of the Digilent Nexys-2 boards?

I took a closer look at this board.  It has a lot to offer over the older
Digilent 2 boards that I've used a fair bit.

If there was interest, we could do some aux interface boards for the
Nexsys-2 -- either simple I or O boards for the 2x6 connectors or a bigger
multi-function I/O board for the Hirose FX2 connector.   (I didn't lock
closely enough at the pin outs, but we'd certainly want to be able to drive
one or more of the FPGA clock inputs directly.)

-ch