[time-nuts] PCB for frequency dividers
David C. Partridge
david.partridge at dsl.pipex.com
Fri Jul 25 16:47:39 EDT 2008
Read the license - seems appropriate to me. Happy to talk further, let's
take this off list.
Please use my email david dot partridge at dsl dot pipex dot com
I'll be away over the w/e so don't expect a prompt reply ...
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of John Ackermann N8UR
Sent: 25 July 2008 18:18
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] PCB for frequency dividers
David C. Partridge said the following on 07/25/2008 12:17 PM:
> BTW Someone suggested that this might be relevant to TAPR. I'm very
> to grant TAPR the free (no charge) use of the design, conditional only
> on my retaining copyright.
TAPR's Time and Frequency Design Team (i.e., me) is definitely interested in
a divider design, though what I had in mind is slightly different than your
design, David, perhaps because of a slightly different idea of
functionality, as well as matching the footprint of the existing TADD-1 and
TADD-3 boards. I've been a bit out of the loop lately because of some
medical problems, but would love to talk with you about this.
But more generally, and why I'm sending this to the list, I'd encourage
hardware designers to look at the TAPR Open Hardware License
(http://www.tapr.org/OHL) for their projects. It's available for use by
anyone, whether or not connected with TAPR.
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
and follow the instructions there.
More information about the time-nuts