[time-nuts] AC Connector On HP 5061B

Jeffrey Okamitsu w3kl at w3kl.com
Sat Oct 4 01:00:56 UTC 2008






Depending on frequency, achieving the necessary phase matching surely must be achievable electrically or, at microwave frequencies, via a variable length waveguide?
 
I can't imagine that for a precision application one would rely on a coaxial cable maintaining it's length and its other properties.
 
Jeff

Jeffrey K. Okamitsu, PhD, MBA
+1-609-638-5402

--- On Fri, 10/3/08, Bruce Griffiths <bruce.griffiths at xtra.co.nz> wrote:

From: Bruce Griffiths <bruce.griffiths at xtra.co.nz>
Subject: Re: [time-nuts] AC Connector On HP 5061B
To: "Discussion of precise time and frequency measurement" <time-nuts at febo.com>
Date: Friday, October 3, 2008, 6:57 PM

Lux, James P wrote:
>   
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com
>> [mailto:time-nuts-bounces at febo.com] On Behalf Of Jeffrey Okamitsu
>> Sent: Friday, October 03, 2008 2:46 PM
>> To: Discussion of precise time and frequency measurement
>> Subject: Re: [time-nuts] AC Connector On HP 5061B
>>
>> For an interferometric application, isn't it sufficient to
>> maintain constant phase difference?
>>
>> Jeff
>>
>> Jeffrey K. Okamitsu, PhD, MBA
>> +1-609-638-5402
>>
>>     
>>> Your absolutely right.  The only two places that I can
>>>       
>> think of, off
>>     
>>> hand, would be televison and RADAR (systems with multiple
>>>       
>> terminals).
>>     
>>> Bill....WB6BNQ
>>>
>>>
>>>       
>> Interferometers are another.
>>
>>     
>
>
> Jeff is right, BUT, keeping constant phase difference without equal length
cables can be challenging. Consider a system I worked on which used phase
difference between 7 GHz signals received between two antennas about a meter
apart to steer a return beam at 32GHz back the same direction. And, it has to do
this while subject to temperature variations from -40 to +80C.
>
>
>
> James Lux, P.E.
> Task Manager, SOMD Software Defined Radios
> Flight Communications Systems Section
> Jet Propulsion Laboratory
> 4800 Oak Grove Drive, Mail Stop 161-213
> Pasadena, CA, 91109
> +1(818)354-2075 phone
> +1(818)393-6875 fax
>
>
> _______________________________________________
>   
However for RF interferometers/bridges the phase differences have to be 
accurately set, a constant phase difference isnt sufficient.

Bruce

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.


More information about the time-nuts mailing list