[time-nuts] WWV / WWVH / WWVB
chris.kuethe at gmail.com
Wed Jan 7 16:55:48 UTC 2009
On Wed, Jan 7, 2009 at 6:52 AM, David M. Witten II <wittend at wwrinc.com> wrote:
> James R. Gorr wrote:
>> Have you been able to RX WWVB with it (even if you haven't written anything to decode it)?
> No, I haven't had time to make one work. It seems like a nice little
> package, but how useful and for what purposes I am not yet certain. My
> curiosity just got the better of me (again). The device produces a
> pulse train that encodes the WWV information.
It's super-easy to get bits out.
(component side up, solder pads on the bottom edge)
pin 5 is the enable/power-on pin. ground it to turn the module on.
then you get bits on pin 6 and 7.
>> I wonder what the no CPU means?
> That worried me too. I read the manufacturer's information and it seems
> that this is sometimes used with an Epson 4 bit CPU. But any CPU/MCU
> should be able to do the job. A small PIC or AVR should be able to
> handle it easily.
I have one of these modules connected to an arduino (AVR)... for the
moment i hacked up an ugly little logger that just samples at 100Hz,
toggles the LED and prints the samples. I need to spend some quality
time with the manual and read about input capture.
> There is an article in the November '08 Circuit Cellar Magazine that
> uses this module with a Freescale DEMO9S08QG8:
> The article gives some details of decoding, but I don't have Freescale
> tools and have a satisfactory (better) NTP server, so I won't duplicate it.
searching for "AVR WWVB" and "AVR DCF77" turned up some leads.
GDB has a 'break' feature; why doesn't it have 'fix' too?
More information about the time-nuts