[time-nuts] Generating 66.666...MHz from 10MHz
christophe.huygens at cs.kuleuven.ac.be
Mon Jun 29 07:01:18 UTC 2009
My solution is to lock a 1GHZ Crystek resonator
to 10MHz, and then use this to drive a DDS AD9912.
Recent generations of DDS are quite impressive.
Murray Greenman wrote:
> Here's an idea which actually works (I tried it). Rather than lock at
> 10MHz, you lock directly to 1pps.
> You can lock an XO to 1/3 Hz steps by locking to 1pps and ignoring two
> out of three results from the TIC. I did it at 7.333MHz, using an
> AT90S2313 micro, and you could just as easily do it at 8.333... and then
> multiply by 8.
> Yes, it does leave you with a very low loop frequency! Although I've not
> tried it, you could potentially add 120 degrees equivalent to one
> intermediate TIC result and subtract 120 degrees from the next, and so
> lock at 1Hz.
> Murray ZL1BPU
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 328 bytes
Desc: not available
More information about the time-nuts