[time-nuts] Re again: Lady Heather version 2.0 now available
Arnold.Tibus at gmx.de
Tue May 12 13:52:15 UTC 2009
please forget my prev. statements and question concerning the toggle function:
I was 'miope', blind, I just saw the new way you implemented the toggle functions,
to be enabled via the command line and including the temperature information!
I have to redo my command line accordingly.
I do use this nice tool very often because it gives me a good instant overview
of the TB and GPS SATs situation (I still use as well TBoltmon.exe complementary).
The best of all for me is the visualisation of the data showing the relations and
The graph is perfect even on my display with the 1600 x 1200 resolution.
My wish: I would like to toggle off the temp information (my TB seem to have a
problem with the temp reading.), is there a way? What about toggling other
Further Questions: Why do you put in 77ns delay? Is your (coax) line so long ;-)?
Btw. i use about 25 m RG58 without any problem, the signals are
showing mostly 37 to 44dB and have 4 to 7 SATs in the list.
I do run the system very comfortable on distance via WLAN, LAN and a W&T
Ethernet to COM port converter on my Laptop from everywhere in and around
Why I am not able to switch in the Kalman Filter option, wrong understanding?
The x and y toggle description does show the same function explanation
I do not fully understandas well the command line options in readme.htm for
/x and /y option related to this toggle function. Could you check it and
Many thanks, as well to Mark Sims - and not to forget Tom Van Baak for
the ADEV routines!
On Sat, 9 May 2009 23:06:53 -0700, John Miles wrote:
>I think an extra '.' found its way into that link:
>-- john, KE5FX
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
>> Behalf Of Mark Sims
>> Sent: Saturday, May 09, 2009 8:39 PM
>> To: time-nuts at febo.com
>> Subject: [time-nuts] Lady Heather version 2.0 now available
>> Lady Heather's GPS Disciplined Oscillator Control Program has
>> been upgraded to version 2.0
>> It is available from John Miles' site
>> The new version adds many new features including the ability to
>> view data at different time scales, calculate HDEVs, MDEVs, and
>> TDEVs (including a mode to display/plot all versions of the adevs
>> at the same time), read in and write log files, adjust
>> oscillator disciplining parameters, zoom in/out on a graph with
>> the click of a mouse, etc. DOS mode users can use EMS memory
>> for extended ADEV intervals.
>> The new version did change some of the command line parameters
>> and keyboard commands. You may need to tweak your startup
>> command profile. You should check the readme file and online
>> help ("heather /?" and "?" from the keyboard) for more info.
>> Also check the change info in heather.cpp for more detailed info
>> on the changes (and a couple of undocumented features).
>> Many thanks to John for his Windows port and help.
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
===================END FORWARDED MESSAGE===================
More information about the time-nuts