[time-nuts] What's the latest correct PICTIC II Mouser project?

[Steve Rooke]

Hi Bob,

Oh, I'll be doing that, for sure, as I expect most if not all the
passives are in the junk-box. It's just finding them, my "filing
system" seems to be having a bit of a meltdown of late and I'm
frequently in the state of know I have something, somewhere, but I
can't for the life of me find it. Guess it's time for me to be put out
to grass :(

The good thing about trying to find things is that it's quite amazing
the items that turn up that you didn't really know you had lost. The
only problem is that I can never find the actual item I'm looking for.
My place is far too small for all the stuff I have and that makes it
difficult to organise things.

Cheers,
Steve

On 08/08/2010, Bob Camp <lists at rtty.us> wrote:
> Hi
>
> I strongly recommend checking your local inventory (dare I say junk box.)
> off a lot of the parts. Stuff like bypass caps likely something you have.
>
> Bob
>
>
>
> On Aug 7, 2010, at 5:10 AM, Steve Rooke <sar10538 at gmail.com> wrote:
>
>> Hi Bob,
>>
>> I have the correct DIL 74175 so I can untick that item.
>>
>> Steve
>>
>> On 07/08/2010, Bob Camp <lists at rtty.us> wrote:
>>> Hi
>>>
>>> As far as I know all the parts are correct except the 74175. It is the
>>> soic
>>> version.
>>>
>>> Bob
>>>
>>>
>>>
>>> On Aug 6, 2010, at 7:16 PM, Steve Rooke <sar10538 at gmail.com> wrote:
>>>
>>>> Bob,
>>>>
>>>> Thanks for that, this Mouser project has all available parts. Do you
>>>> know if the pots, trimmers, etc. are ones as suggested for the correct
>>>> orientation, pin spacing, etc. as i believe there was some discussion
>>>> regarding this in among the many postings on this topic?
>>>>
>>>> Steve
>>>>
>>>> On 07/08/2010, Bob Camp <lists at rtty.us> wrote:
>>>>> Hi
>>>>>
>>>>> I believe the project at:
>>>>>
>>>>> http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8736DCEE10
>>>>>
>>>>> is up to date in (no un-orderable parts).
>>>>>
>>>>> Bob
>>>>>
>>>>> -----Original Message-----
>>>>> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
>>>>> Behalf Of Didier Juges
>>>>> Sent: Friday, August 06, 2010 8:36 AM
>>>>> To: 'Discussion of precise time and frequency measurement'
>>>>> Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser
>>>>> project?
>>>>>
>>>>>
>>>>> I have not seen an answer to that question (for people in the US) ?
>>>>>
>>>>> I am waiting for the PWB, which I believe I paid for, and I am planning
>>>>> to
>>>>> buy or make (have not looked into that yet) a PIC programmer, since it
>>>>> looks
>>>>> like I may get some mileage out of that anyhow.
>>>>>
>>>>> No rush, but there is no good reason to delay either at that point.
>>>>>
>>>>> Thanks
>>>>>
>>>>> Didier
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> time-nuts mailing list -- time-nuts at febo.com
>>>>> To unsubscribe, go to
>>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>>> and follow the instructions there.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> time-nuts mailing list -- time-nuts at febo.com
>>>>> To unsubscribe, go to
>>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>>> and follow the instructions there.
>>>>>
>>>>
>>>>
>>>> --
>>>> Steve Rooke - ZL3TUV & G8KVD
>>>> The only reason for time is so that everything doesn't happen at once.
>>>> - Einstein
>>>>
>>>> _______________________________________________
>>>> time-nuts mailing list -- time-nuts at febo.com
>>>> To unsubscribe, go to
>>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>>> and follow the instructions there.
>>>>
>>>
>>> _______________________________________________
>>> time-nuts mailing list -- time-nuts at febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>> and follow the instructions there.
>>>
>>
>>
>> --
>> Steve Rooke - ZL3TUV & G8KVD
>> The only reason for time is so that everything doesn't happen at once.
>> - Einstein
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>


-- 
Steve Rooke - ZL3TUV & G8KVD
The only reason for time is so that everything doesn't happen at once.
- Einstein