[time-nuts] LCD monitor for TBolt
Didier Juges
didier at cox.net
Sat Aug 7 22:29:40 UTC 2010
You do not need a switch, the T-Bolt Monitor only reads what's coming from the T-Bolt, you just need to wire two connectors in parallel, and as long as Lady Heather uses the same T-SIP protocol, which I believe is the case, you should be OK.
Didier KO4BB
------Original Message------
From: Dr. Frank Stellmach
Sender: time-nuts-bounces at febo.com
To: Time-Nuts
ReplyTo: Time-Nuts
Subject: [time-nuts] LCD monitor for TBolt
Sent: Aug 7, 2010 2:34 AM
Dick,
I also ordered an LCD monitor from fluke.l (beneath an LPRO Rubidium).
For Lady Heather, do I have to add a switch between the monitor and the
PC, or does the monitor have an additional RS232 port to feed through
the PC communication automatically?
Frank
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
------------------------
Sent from my BlackBerry Wireless thingy while I do other things...
More information about the time-nuts
mailing list