[time-nuts] Jupiter GPS DO

ashley40 at aol.com ashley40 at aol.com
Sun Feb 21 02:07:01 UTC 2010


Hi.....Just wondering if A) You received my payment, and B) if you have any idea when you might mail the chips ?  I found the appropriate schematics for the 12F629's, however, as I mentioned, if you have and can program a couple of 16F688's and invoice me for them, I'd be more than happy to send you more $$ via Pay Pal.

Thanks 

Ashley



 
 
Thank You
Kiss-Electronics
Ms Ashley Hall
183 N 5th Avenue
Cornelius, Oregon
97113
 
 
W7DUZ
 
 
www.kiss-electronics.com



-----Original Message-----
From: Robert Atkinson <robert8rpi at yahoo.co.uk>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Wed, Feb 17, 2010 11:49 pm
Subject: Re: [time-nuts] Jupiter GPS DO


Hi Ashley,
 can supply programmed chips for you. I have a couple of Jupiters but will have 
o check the Software revision.
lease conmtact me off list.

obert G8RPI.
--- On Thu, 18/2/10, ashley40 at aol.com <ashley40 at aol.com> wrote:

rom: ashley40 at aol.com <ashley40 at aol.com>
ubject: Re: [time-nuts] Jupiter GPS DO
o: peter at ni6e.com, time-nuts at febo.com
ate: Thursday, 18 February, 2010, 3:20

Hello........thank you !! I have no facilities for doing that, so maybe I can 
ind someone who can do the programming with whatever gizmo is needed, if I 
urnish the chips?
Thanks 
Ashley
7DUZ


Thank You
iss-Electronics
s Ashley Hall
83 N 5th Avenue
ornelius, Oregon
7113

7DUZ

ww.kiss-electronics.com

-----Original Message-----
rom: Peter Putnam <pico.2008 at sbcglobal.net>
o: Discussion of precise time and frequency measurement <time-nuts at febo.com>
ent: Wed, Feb 17, 2010 7:16 pm
ubject: Re: [time-nuts] Jupiter GPS DO

shley, 
You will find Microchip PIC code that does exactly what you want here: 
http://www.ni6e.com/time/GPS_Valid_Fix.html 
The variables are set for use with a Rockwell Jupiter chip set. 
Regards, 
eter 

shley40 at aol.com wrote: 
 Hello .... I wanted to thank everyone who responded when I got on here and 
hined about not knowing how to get a Jupiter GPS DO gizmo going. > I finally 
id a crash course in GPS and DO's, and, even though my head hurts , I think I 
ave a pretty good idea how all those pieces are scrunched together and how they 
ork . (sort of). 
 Anyhow, 
 I would like to know if anyone out there in Time Nutz land has any of the 
ollowing stuff they might consider selling: 
 Jupiter gps receivers ( V1.80 or higher), OR a Jupiter GPSDO complete gizmo, 
R 
 The little microprocessor thing that W1 ( Mr Sullivan I think) something had 
ffered a couple of years ago: it was designed to show a LED when the Jupiter 
S232 data stream showed a GPS "lock" > I would like to get my hands on at least 
ne of those "lock LED" gizmos. ( or the parts to build one). I did Email Mr 
ullivan but so far no response. > 
 Thanks again for everyone's help ! 
 
 Ms Ashley Hall 
 ( W7DUZ) > 
 
 
 > > Thank You 
 Kiss-Electronics 
 Ms Ashley Hall 
 183 N 5th Avenue 
 Cornelius, Oregon 
 97113 
 > > W7DUZ 
 > > www.kiss-electronics.com 
 _______________________________________________ 
 time-nuts mailing list -- time-nuts at febo.com 
 To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts 
 and follow the instructions there. 
 
  
______________________________________________ 
ime-nuts mailing list -- time-nuts at febo.com 
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts 
nd follow the instructions there. 
_______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.

      
______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.



More information about the time-nuts mailing list