[time-nuts] GPSDO - was - oscillator choice question
ernieperes at aol.com
ernieperes at aol.com
Tue May 18 05:54:17 UTC 2010
Hi Dick,
Please contact directly with F5CAU about the PCB and PIC code.....
also there is a VE2ZAZ based GPSDO......please see this link.....
http://rxcontrol.free.fr/PicGPS/index.html
Rgds Ernie.
-----Original Message-----
From: Richard W. Solomon <w1ksz at earthlink.net>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Mon, May 17, 2010 11:52 pm
Subject: Re: [time-nuts] GPSDO - was - oscillator choice question
Will the boards be available for purchase ? I would like to
uild two of them.
73, Dick, W1KSZ
----Original Message-----
From: ernieperes at aol.com
Sent: May 17, 2010 4:58 PM
To: time-nuts at febo.com
Subject: Re: [time-nuts] GPSDO - was - oscillator choice question
Hi,
there is a modified W5OJM GPSDO and all the PCB and so on......please see the
lwng link
http://pagesperso-orange.fr/f5cau/base_temps_gps_f5cau/page_basegpsF5CAU.htm
Basically a well designed mods of the above idea.......and no special
arts..... and it runs from 10MHz.....
Rgds Ernie.
-----Original Message-----
From: Bob Camp <lists at rtty.us>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Mon, May 17, 2010 3:40 am
Subject: Re: [time-nuts] GPSDO - was - oscillator choice question
Hi
Part of the issue is that some of the thinking on GPSDO's dates back to the era
>f selective availability on GPS. Designs from that era need to be upgraded to
eally get them to be all they can be with SA turned off.
Bob
n May 16, 2010, at 9:19 PM, Stanley Reynolds wrote:
> Parts for the Brooks Sheera W5OJM design are getting hard to find also need
he extra divider mod for the 10 Mhz OCXO
The James Miller G3RUH design is popular for simple if you have the right GPS
eceiver with 100Khz out.
VE2ZAZ design has a few issues with ground loops ( a fix is out there) and
sing the same buffer for all outputs, may also need a buffer amp for the 10811,
>nother mod would be a separate voltage regulator for the ECC voltage.
I think all three designs would fall short for most on the list, but for me it
>s hard to tell the difference.
Did you have another design in mind ?
Stanley
<snip>
Now I am reading Time-nuts history and I see that
there is no consensus on which of the popular/published GPSDO
configurations is the best return on effort and expense.
That is rather disappointing.
Any comments on that before I just flip a coin?
<snip>
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
______________________________________________
ime-nuts mailing list -- time-nuts at febo.com
o unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
nd follow the instructions there.
More information about the time-nuts
mailing list