[time-nuts] Z3805 utility, Was: AW: (no subject)

[Robert Benward]

Hi Ulrich,
Thank you for your response.  I hope to try it today if I can get away from household duties.  Will I need to leave the 
computer hooked up, or will it run stand alone once I set it up?

Thanks,
Bob


----- Original Message ----- 
From: "Ulrich Bangert" <df6jb at ulrich-bangert.de>
To: "'Discussion of precise time and frequency measurement'" <time-nuts at febo.com>
Sent: Saturday, May 22, 2010 5:50 AM
Subject: [time-nuts] Z3805 utility, Was: AW: (no subject)


> Bob,
>
> everything you need for the Z3805 is included in my Z38XX utility, that has
> already been mentioned. This includes sending commands to the receiver, you
> do not need another terminal program. I own a Z3805 myself and basically I
> have written the software for myself. A Z3801 manual in conjunction with
> Z38XX should take you pretty far in either get it to run or otherwise
> diagnose a fault.
>
> Best regards
> Ulrich Bangert
>
>> -----Ursprungliche Nachricht-----
>> Von: time-nuts-bounces at febo.com
>> [mailto:time-nuts-bounces at febo.com] Im Auftrag von Robert Benward
>> Gesendet: Samstag, 22. Mai 2010 03:15
>> An: time-nuts at febo.com
>> Betreff: [time-nuts] (no subject)
>>
>>
>> Hi,
>> I just purchased a Z3805A at the Dayton hamfest this past
>> weekend.  How do I
>> get it to work?  Do I need software to run this, or can it
>> run stand alone.
>> I have turned it on, but only the power light comes on, the
>> GPS lock, and
>> more importantly, the enable light is not on.  There is an
>> 10MHz output, but
>> the holdover light is not on.  Is there any freeware available?  Any
>> recommendations?
>>
>> Any opinions on this one:
>>
>> http://cgi.ebay.com/GPS-Receiver-Program-HP-Z3801A-Z3805A-Z381
> 6A-58540A-/250566043297?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item3a56e666
> a1
>
> Thank you in advance.
>
> Bob
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.