[time-nuts] More from the obsolete gps file: oncore nmea

[normn3ykf at stny.rr.com]

Mike,
It would still output data at 9600 moto bin(after sending @@Ci). I also tried successfully to turn on the Hn string.
I'm doing something wrong, or there is something I'm not doing right..
Thanks
Norm 
---- mike cook <mike.cook at orange.fr> wrote: 
> Hi Norm,
> hmm. doc says that the command willl switch the port to 4800, so you 
> should see no coherent data at all immediately that the command is 
> executed. Were you still getting 9600 data without resetting the device? 
> Would it respond to MBP commands after the @@Ci ?
> Mike
> 
> Le 30/05/2010 11:04, normn3ykf at stny.rr.com a écrit :
> > Hi all!!
> > Trying to get a gt+ setup(also tried one of my m12+t's) as a nmea receiver. @@Ci does not work. Did form the string correctly.
> > Tried it with tac32, used Labview to send the hex string.
> > Receiver ignores it and continues to send moto bin at 9600..
> > Any ideas??
> > Want to use this for a balloon flight with aprs. Good news is that we want to launch Friday, so it's not too pressing.
> > Norm n3ykf
> >
> >
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> >
> >
> >
> >    
> 
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.