[time-nuts] Lucent Rubidium Adjustment
Stanley Reynolds
stanley_reynolds at yahoo.com
Sun Oct 3 22:44:57 UTC 2010
Depends on which one you have but the one with heat sink fins on the front has a
adjustment pot under a screw on the front appears as a break in the 3rd fin from
the left. Don't know about the gold color case one's.
Stanley
----- Original Message ----
From: Perry Sandeen <sandeenpa at yahoo.com>
To: "time-nuts-request at febo.com" <time-nuts at febo.com>
Sent: Sun, October 3, 2010 5:30:20 PM
Subject: [time-nuts] Lucent Rubidium Adjustment
Gents,
I have several Lucent rubidiums that seem to be .02 Hz off at 15 MHz compared to
the 15 MHz Lucent GPS. Does anyone know how to either phase lock it to a GPS of
install something like a 20 turn pot to adjust the control pin frequency so an
exact match may be achieved?
Regards,
Perrier
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list