[time-nuts] HP 5370B - result

Mike Feher mfeher at eozinc.com
Wed Sep 15 12:45:56 UTC 2010


I believe it is marked on the fuse body, and, possibly may be around 125C.
However it has been a long long time since I have looked at one. Regards -
Mike

Mike B. Feher, N4FS
89 Arnold Blvd.
Howell, NJ, 07731
732-886-5960



-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Neville Michie
Sent: Wednesday, September 15, 2010 8:32 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] HP 5370B - result

The catch with the thermal fuse in an un-plated socket is that as it  
ages the socket oxidises and
the heater current generates enough ohmic heating through a high  
resistance socket
to heat the fuse through its leads. This opens the fuse the next time  
the oven is heated from cold.
I just repaired a 10811 today with the same problem.
Does anyone know the rated temperature for the fuse to drop out?
cheers, Neville Michie


On 15/09/2010, at 8:40 PM, Charles P. Steinmetz wrote:

> After cooling and restarting the 5370B and observing its behavior,  
> we judged that it was more likely it had an unheated 10811 than an  
> oscillator of lower stability, so we popped the lid (the  
> possibility that it didn't have a 10811/10544 was the reason for  
> leaving it intact so it could be returned).  Sure enough, we found  
> a cold 10811 and an open thermal fuse.  After replacing the thermal  
> fuse with a jumper, all appears normal.  (As others have noted, it  
> appears to me that if the heater control failed the crystal and  
> heater would suffer major trauma before the thermal fuse opened, so  
> we deemed it superfluous.)
>
> Thank you all for your comments and suggestions!
>
> Charles
>
>
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/ 
> time-nuts
> and follow the instructions there.


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




More information about the time-nuts mailing list