[time-nuts] Synchronisizing a 100MHz TCXO with Tbold, pse help

[Chuck Forsberg WA7KGX N2469R]

Replace the 10 mHz oscillator with a divide by ten counter
driven by the 100 mHz signal.  Connect the control voltage
from the Tbolt to the 100 mHz oscillator through a low pass
filter and voltage divider that provides the minimum signal
required for discipline.  Tboltmon can set gain etc., even invert the 
signal.

-- 
Chuck Forsberg WA7KGX N2469R     caf at omen.com   www.omen.com
Developer of Industrial ZMODEM(Tm) for Embedded Applications
   Omen Technology Inc      "The High Reliability Software"
10255 NW Old Cornelius Pass Portland OR 97231   503-614-0430