[time-nuts] Fluke 207 vlf rcvr schematic please
salccor at rogers.com
Mon Sep 26 16:27:39 UTC 2011
I have a Fluke 207-E-5 VLF Receiver with a number of problems, can You help with a service manual?
Sal C. Cornacchia
Electronic RF Microwave Engineer (Ret.)
From: paul swed <paulswedb at gmail.com>
To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
Sent: Saturday, September 24, 2011 11:23:20 PM
Subject: Re: [time-nuts] Fluke 207 vlf rcvr schematic please
Everyone I want to thank you for your help.
I was sent the snippet I needed and the 207 lives. Copying wwvb right now.
Needs a bit more tlc like getting the phase accumulator working correctly.
Annoying as they actually are. But the rcvr looks pretty hot. The chart
recorders running now and making plots.
On Sat, Sep 24, 2011 at 10:13 PM, Dave M <dgminala at mediacombb.net> wrote:
> On 9/24/2011 9:39 AM, paul swed wrote:
>>> Hello to the group I wonder if anyone might have the fluke 207 vlf
>>> manual. I am actually looking for the phase shifter board.
>>> I think it actually uses a regenerative divider from what I can tell
>>> and suspect the issues I see are at that point. Slightly off
>>> frequency 100hz. Which is actually pretty large.
>>> Thanks in advance
>> I have a fluke 207 and manual. I will look for it tomorrow. Getting it
>> scanned might be a problem?
>> Will let you know.
> If you're in a hurry, you can buy the Fluke 207 manual from the following
> online vendors:
> dgminala at mediacombb dot net
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> and follow the instructions there.
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts