[time-nuts] Leap Second decision postponed
azelio.boriani at screen.it
Fri Jan 20 12:03:23 UTC 2012
Mmmmh, problem: can't find the @@Tr command details... my M12 gives a
response for the @@Tr but at the moment I can't decode it. The Oncore VP
has the @@Bl command but the M12 doesn't recognize it. Is the @@Tr an
undocumented/secret command? Found a lot of PDFs on the M12 but no @@Tr in
On Fri, Jan 20, 2012 at 10:08 AM, Azelio Boriani
<azelio.boriani at screen.it>wrote:
> Yes, I was too fast, looked again and found only almanac data. I'll try on
> my M12.
> On Fri, Jan 20, 2012 at 2:04 AM, Tom Van Baak <tvb at leapsecond.com> wrote:
>> No, @@Be is just the almanac data. That is not what you want.
>> On the M12 to get all the subframes you use @@Tr.
>> ----- Original Message ----- From: "Azelio Boriani" <
>> azelio.boriani at screen.it>
>> To: "Discussion of precise time and frequency measurement" <
>> time-nuts at febo.com>
>> Sent: Thursday, January 19, 2012 4:14 PM
>> Subject: Re: [time-nuts] Leap Second decision postponed
>> For the Motorola/iLotus receiver the command is @@Be. But the data
>>> has no such page 18 of subframe 4. Manual says subframe 4 with pages 2 to
>>> 5, 7 to 10 or 25 and subframe 5 with pages from 1to 25.
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>> and follow the instructions there.
More information about the time-nuts