[time-nuts] GPIB programming 'íb' style
shalimr9 at gmail.com
shalimr9 at gmail.com
Tue Jan 24 18:01:06 UTC 2012
Is there a way to make a dll or an ocx out of the gpibport.cpp so that I could use it from within visual basic?
Sent from my BlackBerry Wireless thingy while I do other things...
From: "John Miles" <jmiles at pop.net>
Sender: time-nuts-bounces at febo.com
Date: Mon, 23 Jan 2012 13:51:15
To: 'Discussion of precise time and frequency measurement'<time-nuts at febo.com>
Reply-To: Discussion of precise time and frequency measurement
<time-nuts at febo.com>
Subject: Re: [time-nuts] GPIB programming 'íb' style
> So for NI488.2 it is clear, I will go finding the
> new stuff in their site... I hope to find ;-)
> It would be great if they have produced some
> table with the old and the new calls. I'll dig.
> For porlogix I'll take a look at the timelab source,
> good idea. At the moment I don't own one
> and was in my concerns if I could actually write
> code for it not too differently from what I already know...
> Before I get one ;-)
> Thanks, that was exactly the starter info I was looking.
Note that you can just copy gpibport.cpp into your project to get support
for all three -- NI488.2, Prologix GPIB, and Prologix LAN -- with the same
API. That way you wouldn't need to look at the NI488.2 documentation at
all, except to add support for functions that aren't abstracted by gpibport.
GPIBPORT::set_connection_properties() will take an identifier string like
"GPIB0" for NI hardware, "COM3" for Prologix GPIB-USB, "192.168.100.1" for
Prologix GPIB-LAN, or "COM1:baud=9600 parity=N data=8 stop=1" for generic
RS-232 support without Prologix markup.
Some counters like the SR 620 can use any of the four interface types, since
they have standard GPIB ports and also allow GPIB-style control through
their serial ports, so that module needed to be able to enumerate all of the
possible connection types and handle them polymorphically, so to speak.
The source file drivers\GPIB_TIC\GPIB_TIC.cpp is probably the best example
to look at if you want to use the gpibport API. The only real
hardware-dependent stuff is in ACQ_CONTEXT::select_port(), where it builds
the selection list of interfaces and ports found on the user's system.
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts