Linux AX25-HOWTO, Amateur Radio.

Terry Dawson, VK2KTJ, [email protected]

1. Introduction.

• 1.1 Changes from the previous version
• 1.2 Where to obtain new versions of this document.
• 1.3 Other related documentation.

2. The Packet Radio Protocols and Linux.

• 2.1 How it all fits together.

3. The AX.25/NetRom/Rose software components.

• 3.1 Finding the kernel, tools and utility packages.

4. Installing the AX.25/NetRom/Rose software.

• 4.1 Compiling the kernel.
• 4.2 The network configuration tools.
• 4.3 The AX.25 user and utility programs.

5. A note on callsigns, addresses and things before we start.

• 5.1 What are all those T1, T2, N2 and things ?
• 5.2 Run time configurable parameters

6. Configuring an AX.25 port.

• 6.1 Creating the AX.25 network device.
• 6.2 Creating the /etc/ax25/axports file.
• 6.3 Configuring AX.25 routing.

7. Configuring an AX.25 interface for TCP/IP.

8. Configuring a NetRom port.

• 8.1 Configuring /etc/ax25/nrports
• 8.2 Configuring /etc/ax25/nrbroadcast
• 8.3 Creating the NetRom Network device
• 8.4 Starting the NetRom daemon
• 8.5 Configuring NetRom routing.

9. Configuring a NetRom interface for TCP/IP.

10. Configuring a Rose port.

• 10.1 Configuring /etc/ax25/rsports
• 10.2 Creating the Rose Network device.
• 10.3 Configuring Rose Routing

11. Making AX.25/NetRom/Rose calls.

12. Configuring Linux to accept Packet connections.

• 12.1 Creating the /etc/ax25/ax25d.conf file.
• 12.2 A simple example ax25d.conf file.
• 12.3 Starting ax25d

13. Configuring the node software.

• 13.1 Creating the /etc/ax25/node.conf file.
• 13.2 Creating the /etc/ax25/node.perms file.
• 13.3 Configuring node to run from ax25d
• 13.4 Configuring node to run from inetd

14. Configuring axspawn.

• 14.1 Creating the /etc/ax25/axspawn.conf file.

15. Configuring the pms

• 15.1 Create the /etc/ax25/pms.motd file.
• 15.2 Create the /etc/ax25/pms.info file.
• 15.3 Associate AX.25 callsigns with system users.
• 15.4 Add the PMS to the /etc/ax25/ax25d.conf file.
• 15.5 Test the PMS.

16. Configuring the user_call programs.

17. Configuring the Rose Uplink and Downlink commands

• 17.1 Configuring a Rose downlink
• 17.2 Configuring a Rose uplink

18. Associating AX.25 callsigns with Linux users.

19. The /proc/ file system entries.

20. AX.25, NetRom, Rose network programming.

• 20.1 The address families.
• 20.2 The header files.
• 20.3 Callsign mangling and examples.

21. Some sample configurations.

• 21.1 Small Ethernet LAN with Linux as a router to Radio LAN
• 21.2 IPIP encapsulated gateway configuration.
• 21.3 AXIP encapsulated gateway configuration
• 21.4 Linking NOS and Linux using a pipe device

22. Where do I find more information about .... ?

• 22.1 Packet Radio
• 22.2 Protocol Documentation
• 22.3 Hardware Documentation

23. Discussion relating to Amateur Radio and Linux.

24. Acknowledgements.

25. Copyright.