[time-nuts] RE: [tacgps] Telling UT+ to shut up...

Randy Warner randy at synergy-gps.com
Mon Apr 25 18:33:24 EDT 2005


Reset is really about the only way to do it unless you can see what messages are coming out and disable them one at a time. If you have LOTS of time you can just cycle through all the messages and shut them off, but resetting is probably the easiest thing to do.

Randy Warner
Senior Applications Engineer
Synergy Systems, LLC

 -----Original Message-----
From: 	tacgps-bounces at lists.tapr.org [mailto:tacgps-bounces at lists.tapr.org]  On Behalf Of John Ackermann N8UR
Sent:	Monday, April 25, 2005 3:27 PM
To:	tacgps at lists.tapr.org; Discussion of precise time and frequency measurement
Subject:	[tacgps] Telling UT+ to shut up...

Is there a way to tell a Motorola UT+ that is outputting some unknown
set of messages in binary format to stop all output?  I don't want to do
a complete reset, just have the output messages stop so I can start my
own polling from a known state.

I don't see any indication in the command reference of a way to do this,
but I suspect there must be.



tacgps mailing list
tacgps at lists.tapr.org

More information about the time-nuts mailing list