[time-nuts] Datum 1000B 10 MHz Oscillator pinouts for the DB-9connector?

Robert Lutwak Lutwak at Alum.mit.edu
Wed Jul 20 05:24:34 EDT 2005

The 1000B is still in production.  Here's a link to the product folder:


It's no longer the standard oscillator in cesium products but can be found 
in the MHM-2010 hydrogen maser and the 1050A rackmount OCXO instrument.


Robert Lutwak, Senior Scientist
Symmetricom - Technology Realization Center
34 Tozer Rd.
Beverly, MA 01915
(978) 232-1461   Voice           RLutwak at Symmetricom.com   (Business)
(978) 927-4099   FAX             Lutwak at Alum.MIT.edu  (Personal)
(339) 927-7896   Mobile

----- Original Message ----- 
From: "Brooke Clarke" <brooke at pacific.net>
To: "Discussion of precise time and frequency measurement" 
<time-nuts at febo.com>
Sent: Tuesday, July 19, 2005 5:46 PM
Subject: [time-nuts] Datum 1000B 10 MHz Oscillator pinouts for the 

> Hi:
> I'm working on selling my FTS4060/S24 that was broken by the shipper and 
> would like to know the pin outs for the Datum 1000B 10 MHz crystal 
> oscillator, since it's working.  It's frequency can be controlled by using 
> the manual scan control voltage increase/decrease toggle switch.
> Thanks,
> Brooke Clarke, N6GCE
> -- 
> w/Java http://www.PRC68.com
> w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml
> http://www.precisionclock.com
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts 

More information about the time-nuts mailing list