[time-nuts] FE-10A

Magnus Danielson cfmd at bredband.net
Sun Jul 24 10:19:17 EDT 2005


From: "Mike Feher" <mfeher at eozinc.com>
Subject: [time-nuts] FE-10A
Date: Sun, 24 Jul 2005 10:13:36 -0400
Message-ID: <002401c59059$e2d29db0$0201a8c0 at n4fs>

Mike,

> All of the sudden I need a 5 MHz reference. I have loads of 10 MHz ones,
> but, the only 5 MHz I could find is an FE-10A and a couple of HP 00105
> oscillators. I am pretty sure the 00105s died years ago. What I need is the
> pinout on P3 (J3). It is the only connector under the oscillator oven
> assembly intended to mate I assume with the power supply. I need to use this
> today, to test out a piece of equipment, so, any timely replies would really
> be appreciated. A nice bonus would be the meaning of the numbers for the
> circuit check switch. The switch is numbered 1 through 9 but not labeled as
> to function. Thanks - Mike

Have you already ruled out the frequency division with a spare D-flip-flop?
Not ideal, but with a sufficiently good flip-flop the additional phase noise
isn't too much of an annoyance (depending on your needs naturally).

Cheers,
Magnus




More information about the time-nuts mailing list