[time-nuts] HP Z3801A - How to convert the 1PPS & 10MHz Differential Pseudo ECL Output?
Don Mimlitch
donmeis at yahoo.com
Sun Apr 9 20:41:43 EDT 2006
I have a HP Z3801A which outputs the 1 PPS and 10MHz as Differential Pseudo ECL. What is this?
How do I access these signals? How do I convert them to TTL or CMOS Levels. Are there any IC's (DIP Package) to do the conversion? For short cable runs (2 or 3 Ft.) is there a simple circuit for conversion? Also, how might I convert the 1PPS to an RS232 Level. Can I use an RS422/RS485 converter?
I should mention that this unit was converted to RS232 for the RS422 transmit/receive signals which includes a jumper header with only 6 of the jumpers inserted. I wonder if the Z3801A already has circuitry to convert these signals like it does for the RS422 to RS232?
Any help would be appreciated.
Thanks
Don Mimlitch
donmeis at yahoo.com
---------------------------------
How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.
More information about the time-nuts
mailing list