[time-nuts] source for ICS525 demo board ...

John Pettitt jpp at cloudview.com
Fri Feb 17 00:46:41 EST 2006

David G. Andersen wrote:
> I assume you've seen phk's page about doing similar things
> to the soekris boards?
>   http://phk.freebsd.dk/soekris-pps/

That's where I got the idea.
> His page says that he used an ICS 521 instead of an ICS 525, but (a)
> you're basically on the same page, and (b) I think that it was a typo
> and that he actually used a 525. :)
> Did you check digikey and jameco for the demo board?
Yep and nope they don't have it.

>   -Dave
> On Thu, Feb 16, 2006 at 09:29:54PM -0800, John Pettitt scribed:
>> I've been toying with the idea of replacing the crystal in one of my
>> soekris 4801's (it's 27Mhz for the Geode processor) with a signal
>> synthesized from the 5Mhz GPS disciplined output of my TrueTime box -
>> the ICS525 looks like a good part to use to do the work and I was
>> wondering if anybody has used this part in a project and can point at a
>> good source for the demo board with seems to be a quick and dirty way of
>> implementing what I want ....
>> John
>> W6/G6KCQ
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

More information about the time-nuts mailing list