[time-nuts] PLL Phase Noise vs. Divider Jitter
Matt Ettus
boyscout at gmail.com
Sat Jul 8 13:40:53 EDT 2006
> I'm aware that they use mixers at higher frequencies, but what are one's
> alternatives at low frequencies such as a 10MHz reference?
The real answer is not to divide down your reference. This takes
modern PLL chips capable of using a high reference frequency. If you
need fine tuning capability, then you'll have to use a fractional-N
PLL.
Analog Devices has a program called ADISimPLL which allows you to play
with all these factors using real parts.
Matt
More information about the time-nuts
mailing list