[time-nuts] HP-5245L Parts

[Allan W. Bart, Jr.]

>
These units are still plentiful, you might want to go to a local hamfest or ebay, the better deals are at the hamfests.

Allan


From: Bruce Lanning <blanning at acadia.net>
>Date: Wed May 24 14:33:17 CDT 2006
>To: Discussion of precise time and frequency measurement <time-nuts at febo.com>
>Subject: Re: [time-nuts] HP-5245L Parts

>Thanks Allan for the response. I have the HP-5245L and the HP-5262A Time 
>Interval Unit, but it is not working. Problems in the PS and the front 
>handle on the right side is broken off. I had planned to use this unit for 
>frequency comparison, but not sure this is what I want. Your comments would 
>be appreciated.
>Bruce W1GBS
>
>----- Original Message ----- 
>From: "Allan W. Bart, Jr." <allanba at verizon.net>
>To: "Discussion of precise time and frequency measurement" 
><time-nuts at febo.com>
>Sent: Wednesday, May 24, 2006 2:22 PM
>Subject: Re: [time-nuts] HP-5245L Parts
>
>
>> Hello,
>>
>> I have one of these units and it will never die, try fair radio in Lima 
>> OH.
>>
>> Allan Bart>
>>
>>
>> From: Bruce Lanning <blanning at acadia.net>
>>>Date: Wed May 24 12:55:58 CDT 2006
>>>To: time-nuts at febo.com
>>>Subject: [time-nuts] HP-5245L Parts
>>
>>>Looking to buy a HP-5245 or equivalent for parts only. Need not be 
>>>working,
>>>or complete.
>>>If you have this animal and would be willing to part with it, please 
>>>contact
>>>me directly at: blanning at acadia.net      Thanks,
>>>Bruce W1GBS in Maine
>>>
>>>
>>>
>>>_______________________________________________
>>>time-nuts mailing list
>>>time-nuts at febo.com
>>>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>
>>
>> _______________________________________________
>> time-nuts mailing list
>> time-nuts at febo.com
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> 
>
>
>
>_______________________________________________
>time-nuts mailing list
>time-nuts at febo.com
>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts