[time-nuts] FW: HP-IB Commands or Manual for 59309A DigitalClock
tom
w0kgw at citlink.net
Tue Oct 24 10:23:11 EDT 2006
hi,
have three clocks running now and have the manual for them. the front
panel is hard to find but use a paperclip in the hole at the bottom right
corner and raise the cover to see all the switches. that should get you
started. then there is a switch for internal or external reference inside
chose one. think the dipswitches are for the hpib address for the clock.
tom w0kgw at citlink.net
----- Original Message -----
From: "Brooke Clarke" <brooke at pacific.net>
To: <daun at yeagley.net>; <time-nuts at febo.com>
Sent: Monday, October 23, 2006 10:56 PM
Subject: Re: [time-nuts] FW: HP-IB Commands or Manual for 59309A
DigitalClock
> Hi Daun:
>
> I found the sticker on the bottom of my clock, (although your image is
> much much easier to read than the actual size one) but it's not at all
> clear what some of it means. For example:
>
> Setup Instruction 3) Set Front Panel switch to Int or Ext, but my clock
> has no front panel switch.
>
> Operating Instruction E) Send Start code from table 2 to synchronize
> clock with Reference Clock. What does that mean?
>
> Also there are DIP switches inside whose function I sure would like to
> know.
>
> Having Fun,
>
> Brooke Clarke
>
> w/Java http://www.PRC68.com
> w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml
> http://www.precisionclock.com
>
>
>
> Daun Yeagley wrote:
>
>> Hi Brooke
>>
>>I sent a response through the list, but the attachment was a tad large.
>>(I'm
>>sure John would pass it though!)
>>Anyway, I thought I'd save some time and send you the bigger file anyway.
>>Original text pasted here:
>>
>>Hi Brooke
>>
>>Turns out I have one of these on my shelf and it has a label on the bottom
>>with
>>the codes. I've probably got a manual out in my barn, but those of you
>>that
>>know about my manual stash realize that it would take a monumental effort
>>to dig
>>it out. (I keep threatening to have a "manual party" one of these days to
>>rescue them and sort them all out).
>>
>>In the meanwhile, I set it on my scanner, and attached is the result. (I
>>have
>>it in higher resolution as well, but know it would difficult to get it
>>through
>>that way, but if you need it that way I can get with you off list to make
>>it
>>happen)
>>
>>regards,
>>
>>Daun
>>N8ASB
>>
>>
>>
>>
>>
>>-----Original Message-----
>>From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
>>Behalf
>>Of Brooke Clarke
>>Sent: Monday, October 23, 2006 9:43 PM
>>To: Discussion of precise time and frequency measurement
>>Subject: [time-nuts] HP-IB Commands or Manual for 59309A Digital Clock
>>
>>Hi:
>>
>>I'm looking for the HP-IB commands (or better a manual) for the HP 59309A
>>Digital Clock.
>>
>>Have Fun,
>>
>>Brooke Clarke
>>
>>--
>>w/Java http://www.PRC68.com
>>w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml
>>http://www.precisionclock.com
>>
>>
>>_______________________________________________
>>time-nuts mailing list
>>time-nuts at febo.com
>>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
>
More information about the time-nuts
mailing list