[time-nuts] Prologix GPIB/USB converter help...
Prologix
support at prologix.biz
Mon Apr 16 14:20:47 EDT 2007
Hi Said,
In that case the new firmware will not be compatible at all. The new
hardware uses FTDI FT245R USB FIFO chip which has a parallel interface to
the micro. Host side USB drivers make it appear like a virtual serial port,
which is why all the serial port parameters can be ignored.
Abdul
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of SAIDJACK at aol.com
Sent: Monday, April 16, 2007 10:25 AM
To: time-nuts at febo.com
Subject: Re: [time-nuts] Prologix GPIB/USB converter help...
Hi Abdul,
we modified the board to have true RS-232 output to talk to an instrument
that just has RS-232, and we are bypassing the USB chip, but our RS-232
does
not have flow control.
This works well (with the timing loops) but I think with the new software
it
could be sped-up quite a bit.
bye,
Said
************************************** See what's free at
http://www.aol.com.
_______________________________________________
time-nuts mailing list
time-nuts at febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
More information about the time-nuts
mailing list