[time-nuts] HP E1938 Web Page

[John Miles]

My plotter emulator (7470.EXE) will actually render the file, but not at a
high-enough resolution to read the text.  Plus, it was stored in portrait
mode for some reason, which is a problem for both 7470.EXE and the other
HP-GL viewer I have on this machine (the free GC-Prevue Gerber viewer).

So if someone can rotate it and render it to a .PDF at a decent resolution,
that'd be helpful...

-- john, KE5FX

> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
> Behalf Of Arnold Tibus
> Sent: Tuesday, August 28, 2007 11:13 AM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] HP E1938 Web Page
>
>
> On Tue, 28 Aug 2007 10:18:55 -0700, Brooke Clarke wrote:
>
> >Hi:
>
> >I'm working on a web page for the E1938 and have received a
> bunch of files from
> >Rick.  One of them is a .HPG of a schematic.  I've tried to use
> IrfanView, but
> >it's a program I normally don't use and all the images are way
> too coarse to be
> >useable.  Is there a way to convert it to something that can be read?
>
> Hello Brooke,
> Irfanview is in fact very powerful, but as can see in V4.0, it is
>  n o t  capable to
> read HPGL-files - so it is not capable to convert into another format.
> I know only Autocad able to read .hpg, but that does not look
> very comfortable.
>
> If you have a way to print-out these plot pictures (I suppose
> they are) so one
> could make a sharp hi-q picture with a modern 6 Mp camera and use the
> jpg pictures in your page, is that a possibility for you?
>
> regards,
> Arnold
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.