[time-nuts] Thunderbolt GPSDO
n3izn at aol.com
n3izn at aol.com
Tue Feb 13 15:35:07 EST 2007
Tell me more about NTP and GPSD?
I seem to remember downloding something that was suppose to translate Trimbles messages to standard NEMA data but gave up trying to make it work.
-----Original Message-----
From: hmurray at megapathdsl.net
To: time-nuts at febo.com
Sent: Tue, 13 Feb 2007 9:58 AM
Subject: Re: [time-nuts] Thunderbolt GPSDO
> Mine used a +12, two +5 and a -7 VDC. I know the manual says the
> thunder bolt requires a -12 but mine had a -7 on it
Is the -12 used for anything other than driving the RS-232 signals? I expect
that would work with almost anything.
> The data out is Trimble propriety and you have to use their software.
> It's free off their website and I downloaded 2.
ntp has a refclock module that talks to some Trimble units. Looks like gpsd
has Trimble support too. I don't know if they talk to this particular model,
but there is at least some readily available code to look at if anybody wants
to write their own.
--
These are my opinions, not necessarily my employer's. I hate spam.
_______________________________________________
time-nuts mailing list
time-nuts at febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
________________________________________________________________________
Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more.
More information about the time-nuts
mailing list