[time-nuts] Prologix GPIB-USB hint

Ulrich Bangert df6jb at ulrich-bangert.de
Sun Jun 10 04:43:33 EDT 2007


Gerry,

> I built a general 488 script 
> interface on top of his controller...

So did I! Is your's published so that I perhaps may learn something from
it?

74 de Ulrich, DF6JB

> -----Ursprüngliche Nachricht-----
> Von: time-nuts-bounces at febo.com 
> [mailto:time-nuts-bounces at febo.com] Im Auftrag von GerryG
> Gesendet: Samstag, 9. Juni 2007 23:54
> An: time-nuts at febo.com
> Betreff: Re: [time-nuts] Prologix GPIB-USB hint
> 
> 
> Of course you're right, John. I built a general 488 script 
> interface on top of his controller, and the commands are 
> slightly expanded. I'm used to mine, and got them confused. So I do:
> ++auto 0
> at the start. Then
> ++read
> for each read from each device.
> 
> Gerry K7ATS
> 
> >Message: 5
> >Date: Sat, 9 Jun 2007 13:10:11 -0700
> >From: "John Miles" <jmiles at pop.net>
> >Subject: Re: [time-nuts] Prologix GPIB-USB hint
> >To: "Discussion of precise time and frequency measurement"
> >	<time-nuts at febo.com>
> >Message-ID: <PKEGJHPHLLBACEOICCBJIEHFOIAA.jmiles at pop.net>
> >Content-Type: text/plain; charset="US-ASCII"
> >
> >I assume you just mean ++auto 0 followed by ++read, right?  
> There's no
> >++aread command in the 4.4 firmware.
> >
> >-- john, KE5FX
> 
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com 
> https://www.febo.com/cgi-> bin/mailman/listinfo/time-nuts
> 




More information about the time-nuts mailing list