[time-nuts] Prologix GPIB-USB Controller firmware update -version4.60
support at prologix.biz
Sun Jun 10 15:11:03 EDT 2007
Good catch! I didn't realize Microsoft removed HyperTerminal from Vista.
You could use TeraTerm Pro instead -
Configure as follows:
Open "Setup" | "Terminal" dialog, check "Local Echo" and set Transmit to
Then open "Setup" | "Serial Port" and pick the port you want to use.
Rest of the update instructions remain the same.
By default, TeraTerm Pro shows only COM1-4. If your USB serial port is
higher than COM4, edit TERATERM.INI and set MaxComPort to a higher value.
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Edwin B. Walker
Sent: Sunday, June 10, 2007 11:52 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Prologix GPIB-USB Controller firmware update
Abdul, will this controller work with Windows Vista as I don't find a
copy of hyperlink in there?
> Rest of the website will be updated soon to better document the new, and
> old, commands (I know, I know, been saying that for a while!). Meanwhile
> feel free to email support at prologix.biz with any questions.
> time-nuts mailing list
> time-nuts at febo.com
time-nuts mailing list
time-nuts at febo.com
More information about the time-nuts