[time-nuts] time-nuts Digest, Vol 34, Issue 27

Lee Bradshaw lee-bradshaw at networks-now.org
Tue May 15 14:41:37 EDT 2007


I have Austron model 2021L loop antennas and a 8 foot whip to feed 
Austron 2 2100-f, 2100-r, 2 2100, and several 2000C's.

I am looking for a Multifilter to isolate and share the antennas.

time-nuts-request at febo.com wrote:
> Send time-nuts mailing list submissions to
> 	time-nuts at febo.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> or, via email, send a message with subject or body 'help' to
> 	time-nuts-request at febo.com
> 
> You can reach the person managing the list at
> 	time-nuts-owner at febo.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of time-nuts digest..."
> 
> 
> Today's Topics:
> 
>    1. austron 2084 Multifilter (Lee Bradshaw)
>    2. Re: austron 2084 Multifilter (Rob Kimberley)
>    3. Re: austron 2084 Multifilter (Brooke Clarke)
>    4. Re: PTS310 Manual (GandalfG8 at aol.com)
>    5. Re: PTS310 Manual (GandalfG8 at aol.com)
>    6. OT: RE:  Scanning darkly (Palfreyman, Jim L)
>    7. Re: PTS310 Manual (Didier Juges)
>    8. Re: PTS310 Manual (Ulrich Bangert)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Mon, 14 May 2007 11:16:51 -0500
> From: Lee Bradshaw <lee-bradshaw at networks-now.org>
> Subject: [time-nuts] austron 2084 Multifilter
> To: time-nuts at febo.com
> Message-ID: <46488B73.3030009 at networks-now.org>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> I am looking for a Multifilter to share one of two antennas between 
> several receivers. Anyone know where I could find one, or two?
> 
> Lee Bradshaw
> 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Mon, 14 May 2007 17:39:11 +0100
> From: "Rob Kimberley" <rk at timing-consultants.com>
> Subject: Re: [time-nuts] austron 2084 Multifilter
> To: "'Discussion of precise time and frequency measurement'"
> 	<time-nuts at febo.com>
> Message-ID:
> 	<!&!AAAAAAAAAAAYAAAAAAAAAOYAZyOzV8ERq+LmT45ypI7CgAAAEAAAAMn39Q1lYFtAnYdQ+9nfLC4BAAAAAA==@timing-consultants.com>
> 	
> Content-Type: text/plain;	charset="us-ascii"
> 
> What antennae and receivers are you using?
> 
> Rob Kimberley 
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Lee Bradshaw
> Sent: 14 May 2007 17:17
> To: time-nuts at febo.com
> Subject: [time-nuts] austron 2084 Multifilter
> 
> I am looking for a Multifilter to share one of two antennas between several
> receivers. Anyone know where I could find one, or two?
> 
> Lee Bradshaw
> 
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> 
> 
> 
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Mon, 14 May 2007 10:41:58 -0700
> From: Brooke Clarke <brooke at pacific.net>
> Subject: Re: [time-nuts] austron 2084 Multifilter
> To: Discussion of precise time and frequency measurement
> 	<time-nuts at febo.com>
> Message-ID: <46489F66.9020602 at pacific.net>
> Content-Type: text/plain; charset=us-ascii; format=flowed
> 
> Hi Lee:
> 
> I got mine on eBay.  Prior to using it I hadn't appreciated the sferics 
> problem.  You'd be surprised at how often the sferics lamp lights.  I also 
> tuned the notch filters for the RTTY stations that are nearby.
> http://www.prc68.com/I/A2100F.shtml#2084
> 
> Have Fun,
> 
> Brooke Clarke
> http://www.PRC68.com
> http://www.precisionclock.com
> 
> 
> 
> Lee Bradshaw wrote:
>> I am looking for a Multifilter to share one of two antennas between 
>> several receivers. Anyone know where I could find one, or two?
>>
>> Lee Bradshaw
>>
>> _______________________________________________
>> time-nuts mailing list
>> time-nuts at febo.com
>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Mon, 14 May 2007 18:26:46 EDT
> From: GandalfG8 at aol.com
> Subject: Re: [time-nuts] PTS310 Manual
> To: time-nuts at febo.com
> Message-ID: <d12.aa63ec7.337a3c26 at aol.com>
> Content-Type: text/plain; charset="US-ASCII"
> 
> In a message dated 14/05/2007 05:02:13 GMT Daylight Time, didier at cox.net  
> writes:
> 
> Hi  Nigel,
> 
> Welcome to the list.
> 
> You are welcome to upload your  manual to my Manual web  page:
> http://www.ko4bb.com/ham_radio/Manuals
> Instructions are at the  top.
> -------------------------------------------
> Hi Didier
>  
> Nice to see you again, and thanks for the kind welcome.
>  
> The PTS310 manual is actually one I downloaded from Teknet, I could have  
> pointed Ulrich there but it's a bit messy having to register etc.
>  
> Their only restriction is that it shouldn't be sold so uploading it  
> shouldn't be a problem, but please confirm you're happy with that.
> If you are ok with it, I've also got manuals from them for the PTS500 and  
> PTS3200.
>  
>>From a different source I've got the manual for the PTS160 and will  try to 
> upload that too.
>  
> I've got printed copies of the 160 and 310 manuals anyway so that should  
> cover it.
>  
> I say "try", as I'm having problems with broadband dropping out right now,  
> it's happening several times a day and could be a problem with uploads, which  
> are relatively slow.
>  
> I'll start once you confirm you're ok with hosting the Teknet manuals, and  
> keep my fingers crossed my connection holds up until I've finished:-)
>  
> regards
>  
> Nigel
> GM8PZR
>  
>  
>  
> 
> 
> 
>    
> 
> 
> ------------------------------
> 
> Message: 5
> Date: Mon, 14 May 2007 18:46:12 EDT
> From: GandalfG8 at aol.com
> Subject: Re: [time-nuts] PTS310 Manual
> To: time-nuts at febo.com
> Message-ID: <d42.922339c.337a40b4 at aol.com>
> Content-Type: text/plain; charset="US-ASCII"
> 
>  
> In a message dated 14/05/2007 13:41:54 GMT Daylight Time,  
> df6jb at ulrich-bangert.de writes:
> 
> Nigel,
> 
> nice to see you arrive here at this mysthic place where  we render homage
> the ancient gods of time and frequency and the modern gods  of rubidium
> and cesium... 
> 
> Please follow Didier's suggestion, so  more people than just me can take
> advantage out of it.  
> 
> 
> 
> -----------------------
> Hi Ulrich
>  
> And many thanks for the truly poetic welcome:-)
>  
> As you'll see from my reply to Didier, I just need his confirmation that  
> he's ok with hosting the manual, and others, that originally came from Teknet  
> before I upload them.
>  
> If you need it urgently you could register with Teknet and  download it, or I 
> could send it to you and still upload it to Didier's manual  site.
>  
> For anyone needing info on the PTS X10 or PTS250, I have manuals for  these 
> too but only in printed format.
> I'm not able to scan complete manuals right now but could extract specific  
> information if not too many pages.
>  
> I don't know why but, in the UK anyway, the PTS units seem to be one of the  
> world's best kept secrets.
>>From the time I bought my first PTS160, convinced from the info on the PTS  
> site that I'd found something special but not being quite sure until I'd played 
>  with it, I was totally hooked.
>  
> I've got Rockland Wavetek, and Racal, units that are similar, but the  PTS 
> units, for me anyway, definitely have the edge.
>  
> regards
>  
> Nigel
> GM8PZR
> 
> 
> 
>    
> 
> 
> ------------------------------
> 
> Message: 6
> Date: Tue, 15 May 2007 09:29:10 +1000
> From: "Palfreyman, Jim L" <Jim.Palfreyman at team.telstra.com>
> Subject: [time-nuts] OT: RE:  Scanning darkly
> To: "Discussion of precise time and frequency measurement"
> 	<time-nuts at febo.com>
> Message-ID:
> 	<867C7553A0E5DA4C97C96583511181D10274F892 at WSMSG2104V.srv.dir.telstra.com>
> 	
> Content-Type: text/plain;	charset="us-ascii"
> 
> I've recently put a heap of work in for my family reunion and part of
> that was capturing old photographs, newspaper articles and newspaper
> photos.
> 
> I used a Pentax SLR with a Pentax 50mm 1.4 lens (which is an excellent
> lens BTW) and got fantastic results with all media and minimal post
> processing (just light and dark levels). It's a 6MP camera and I was
> even using jpg.
> 
> Just trying to keep it simple - worked for me.
> 
> Regards,
> 
> 
> Jim Palfreyman
>> _______________________________________________
> Process Specialist, Capability & Performance
> Telstra Services - Commercial Management
> http://www.in.telstra.com.au/ism/org747
>> Phone:   03 6223 9901 
> Fax:          1800 809 786
> 
>> This communication may contain CONFIDENTIAL information of Telstra
> Corporation Limited (ABN 33 051 775 556).  If you are not an intended
> recipient, you MUST NOT keep, forward, copy, use, save or rely on this
> communication and any such action is unauthorised and prohibited.  If
> you have received this communication in error, please reply to this
> e-mail to notify the sender of its incorrect delivery, and then delete
> both it and your reply. Thank you.
> 
> -----Original Message-----
> From: Jack Hudler [mailto:jack at hudler.org] 
> Sent: Monday, 14 May 2007 4:01 PM
> To: 'Discussion of precise time and frequency measurement'
> Subject: Re: [time-nuts] Scanning darkly
> 
> You'd get the same results in the end, only now you've added projection
> reconstruction.
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Palfreyman, Jim L
> Sent: Monday, May 14, 2007 12:44 AM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Scanning darkly
> 
> If all the others' suggestions fail, try photographing with a decent
> digital camera. SLR preferably. 
> 
> 
> Jim Palfreyman
> 
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> 
> 
> 
> 
> 
> ------------------------------
> 
> Message: 7
> Date: Mon, 14 May 2007 20:10:21 -0500
> From: Didier Juges <didier at cox.net>
> Subject: Re: [time-nuts] PTS310 Manual
> To: Discussion of precise time and frequency measurement
> 	<time-nuts at febo.com>
> Message-ID: <4649087D.5070202 at cox.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> 
> Hi Nigel,
> 
> I have a few Teknet manuals already on my web site, particularly a 
> couple of service manuals from before they decided they were not going 
> to offer those for download.
> 
> I also checked their conditions and I did not see any obvious indication 
> they would mind.
> 
> Considering they can change their policy at any time, I think it is 
> appropriate to save them for future generations. I'll bet 20 years from 
> now people will still be fixing boat anchors, but stuff built about now 
> will be in the trash.
> 
> Didier
> 
> PS: I did buy a frequency counter from Teknet a couple of years ago and 
> they did an excellent job. The transaction and equipment were absolutely 
> top flight.
> 
> GandalfG8 at aol.com wrote:
>> In a message dated 14/05/2007 05:02:13 GMT Daylight Time, didier at cox.net  
>> writes:
>>
>> Hi  Nigel,
>>
>> Welcome to the list.
>>
>> You are welcome to upload your  manual to my Manual web  page:
>> http://www.ko4bb.com/ham_radio/Manuals
>> Instructions are at the  top.
>> -------------------------------------------
>> Hi Didier
>>  
>> Nice to see you again, and thanks for the kind welcome.
>>  
>> The PTS310 manual is actually one I downloaded from Teknet, I could have  
>> pointed Ulrich there but it's a bit messy having to register etc.
>>  
>> Their only restriction is that it shouldn't be sold so uploading it  
>> shouldn't be a problem, but please confirm you're happy with that.
>> If you are ok with it, I've also got manuals from them for the PTS500 and  
>> PTS3200.
>>  
>> >From a different source I've got the manual for the PTS160 and will  try to 
>> upload that too.
>>  
>> I've got printed copies of the 160 and 310 manuals anyway so that should  
>> cover it.
>>  
>> I say "try", as I'm having problems with broadband dropping out right now,  
>> it's happening several times a day and could be a problem with uploads, which  
>> are relatively slow.
>>  
>> I'll start once you confirm you're ok with hosting the Teknet manuals, and  
>> keep my fingers crossed my connection holds up until I've finished:-)
>>  
>> regards
>>  
>> Nigel
>> GM8PZR
>>  
>>   
> 
> 
> 
> 
> ------------------------------
> 
> Message: 8
> Date: Tue, 15 May 2007 07:43:20 +0200
> From: "Ulrich Bangert" <df6jb at ulrich-bangert.de>
> Subject: Re: [time-nuts] PTS310 Manual
> To: "'Discussion of precise time and frequency measurement'"
> 	<time-nuts at febo.com>
> Message-ID: <000e01c796b3$f4129780$03b2fea9 at athlon>
> Content-Type: text/plain;	charset="iso-8859-1"
> 
> Nigel,
> 
> no, it is not urgent. I am waiting for the PTS310 to arrive here within
> the course of the week. After what you have said about its "edge" I am
> REALLY eager to paly around with it.
> 
> 73s and my best regards
> Ulrich
> 
>> -----Urspr?ngliche Nachricht-----
>> Von: time-nuts-bounces at febo.com 
>> [mailto:time-nuts-bounces at febo.com] Im Auftrag von GandalfG8 at aol.com
>> Gesendet: Dienstag, 15. Mai 2007 00:46
>> An: time-nuts at febo.com
>> Betreff: Re: [time-nuts] PTS310 Manual
>>
>>
>>  
>> In a message dated 14/05/2007 13:41:54 GMT Daylight Time,  
>> df6jb at ulrich-bangert.de writes:
>>
>> Nigel,
>>
>> nice to see you arrive here at this mysthic place where  we 
>> render homage the ancient gods of time and frequency and the 
>> modern gods  of rubidium and cesium... 
>>
>> Please follow Didier's suggestion, so  more people than just 
>> me can take advantage out of it.  
>>
>>
>>
>> -----------------------
>> Hi Ulrich
>>  
>> And many thanks for the truly poetic welcome:-)
>>  
>> As you'll see from my reply to Didier, I just need his 
>> confirmation that  
>> he's ok with hosting the manual, and others, that originally 
>> came from Teknet  
>> before I upload them.
>>  
>> If you need it urgently you could register with Teknet and  
>> download it, or I 
>> could send it to you and still upload it to Didier's manual  site.
>>  
>> For anyone needing info on the PTS X10 or PTS250, I have 
>> manuals for  these 
>> too but only in printed format.
>> I'm not able to scan complete manuals right now but could 
>> extract specific  
>> information if not too many pages.
>>  
>> I don't know why but, in the UK anyway, the PTS units seem to 
>> be one of the  
>> world's best kept secrets.
>> From the time I bought my first PTS160, convinced from the 
>> info on the PTS  
>> site that I'd found something special but not being quite 
>> sure until I'd played 
>>  with it, I was totally hooked.
>>  
>> I've got Rockland Wavetek, and Racal, units that are similar, 
>> but the  PTS 
>> units, for me anyway, definitely have the edge.
>>  
>> regards
>>  
>> Nigel
>> GM8PZR
>>
>>
>>
>>    
>> _______________________________________________
>> time-nuts mailing list
>> time-nuts at febo.com 
>> https://www.febo.com/cgi-> bin/mailman/listinfo/time-nuts
>>
> 
> 
> 
> 
> ------------------------------
> 
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> 
> End of time-nuts Digest, Vol 34, Issue 27
> *****************************************
> 
> 



More information about the time-nuts mailing list