[time-nuts] 10811A

Richard (Rick) Karlquist richard at karlquist.com
Fri Sep 14 15:44:06 EDT 2007

Hi Mike.  I work for Agilent, and HP before that, at the
old Santa Clara Division, where the 10811 was made.
The 10811 Manual, published ~25 years ago, was never
in electronic form within the company.  The 10811 was
only a released product for a brief time early in its
existence.  Few were sold.  It is really for all practical
purposes an internal component with a number like 10811-6XXXX,
of which there are many versions.  Agilent does not attempt to
post anything like a comprehensive set of obsolete
manuals on line, especially ones such as the 10811
which would have to be scanned in.  The 10811 is supported
by the user community, such as time-nuts, etc.

BTW, the designers of the 10811 still work for Agilent and
in fact I was just talking to one them a few days ago.

This is my own opinion, not the official opinion of HP or

Rick Karlquist N6RK

Mike Feher wrote:
> ); SAEximRunCond expanded to false
> Errors-To: time-nuts-bounces+richard=karlquist.com at febo.com RETRY
> I could not find the HP 10811A oscillator manual on the Agilent web site.
> Obviously I am doing some thing wrong. I do have an original of the manual,
> but, wanted to forward a copy to a friend, without having to scan mine. Any
> assistance would be appreciated. Regards - Mike
> Mike B. Feher, N4FS
> 89 Arnold Blvd.
> Howell, NJ, 07731
> 732-886-5960
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list