[time-nuts] Thunderbolt PSU

[David Ackrill]

Oh, for anyone else who has the same PSU as I received, the colours of 
the output, from the markings I can see on the PCB, are as follows.

Brown = Ground (Yes, honestly!  The brown wire is soldered to the case 
in my unit)
Black = 12 Volts (I presume nevative)
Red = +12 Volts
Green = +5 Volts
White = Could not see the markings under some electrolytics.  I'll see 
if I can get a better look later.

But, I would check for yourselves before connecting up to the Trimble. 
As ever, i can't accept responsibility if your unit is wired differently 
from mine.

Dave