[time-nuts] Lassen IQ receiver

Robert Darlington rdarlington at gmail.com
Sat Oct 11 05:06:47 UTC 2008

Looking more closely at the software list, I don't see the utility that I
use.  Whatever it is, it's a DOS based thing or is at least a shell ap with
just text.  I'll dig up the zip file at work when I'm in the office over the
weekend and get it over to you if I still have it.  I've used it
successfully to configure both ports to dump NMEA with varying output


On Fri, Oct 10, 2008 at 8:36 PM, Morris Odell <vilgotch at bigpond.net.au>wrote:

> Hi all,
> I'm using a Trimble Lassen IQ receiver for a Shera style GPSDO. That part
> works OK but I would also like to get serial data from the receiver's
> output
> port #2.
> The receiver seems to respond to commands sent to port #1 but the desired
> outputs don't seem to appear.
> Specifically I want to get two NMEA messages, GGA and ZDA, or alternatively
> the TAIP TM timing message. No matter how I instruct the receiver I don't
> see two NMEA messages, just the first one on the list I've sent to the
> receiver. The TAIP doen't seem to work at all.
> Am I missing something here? Has anyone had any success with this device?
> Thanks,
> Morris
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.

More information about the time-nuts mailing list