[time-nuts] Piezo Company OXCO pinouts (William Rice)

Richard H McCorkle mccorkle at ptialaska.net
Mon Sep 29 17:57:03 EDT 2008


Hello,

I purchased three Piezo 2920136 units and the attached file documents
what the pinouts and EFC requirements are. Hope you find this useful.

Richard


> Just new to this list and found this post while trawling the net for
> the same info. This is a manual reply to a previous posting so the
> message ids won't tally, sorry.
>
> --- William Rice wrote:-
>> Have a surplus Piezo Crystal Co. oscillator. 3x2x2" with 6 pins on bottom, no RF
>> connector.
>> Model# 2920136 / 10.000 Mhz (101728-001)
>> Had trouble finding info.... Maybe standard configuration, 9337 stamped on unit,
>> probably just obsolete.
>> Any help appreciated.
>> Did find one on ebay, my unit is not as abused.
>> Do not know if it needs external control.
>
>> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160286114515
>
> I have a Piezo Model 2920136 10MHz oscillator which seems to be the
> same as in your url link above. The info I have to date for the six
> pins from left to right:-
>
> Out, GND, +24V, ?, Vcc, GND
>
> I don't know what the 4th (?) pin does and I also have know idea as to
> what voltage needs to be connected to the Vcc pin. Any help please?
>
> Thanks,
> Steve
> --
> Steve Rooke - ZL3TUV & G8KVD
> Omnium finis imminet
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Piezo Mini Wonder.pdf
Type: application/pdf
Size: 94010 bytes
Desc: not available
Url : http://www.febo.com/pipermail/time-nuts/attachments/20080929/2ad6fd13/attachment-0001.pdf 


More information about the time-nuts mailing list