[time-nuts] 5061A troubleshooting

Scott McGrath scmcgrath at gmail.com
Tue Sep 30 15:14:20 EDT 2008


Ah,

I do have the 2 resistors on the A15 - I do have the late model oven
controller so my ionizer shoud be DC correct?

Now the only problem which remains is the sourcing of a spare tube

- Scott

On Tue, Sep 30, 2008 at 2:58 PM, corby d dawson <cdelect at juno.com> wrote:
> Scott,
>
> I'm not sure how late a model you have but on the A15 board you should
> see a place for two resistors that are connected on the board in
> parallel.
>
> If you connect a high resitance decade resistor (start at 10Megs) across
> one of the resistors.
>
> Now while monitoring the EM divided voltage reduce the decade resistor
> until the EM test point increses to .25VDC.
>
> Now solder  a 1% resistor of this value across the one of the other
> existing resistors.
>
> Now you are set up for 2500VDC EM voltage.
>
>
> Corby Dawson
> ____________________________________________________________
> Click here to become a professional counselor in less time than you think.
> http://thirdpartyoffers.juno.com/TGL2141/fc/Ioyw6i3oJtoeZD8bdFl3HM6Qnrf4dkHES7UXgr2gqDl1I14G8tilHb/
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>



More information about the time-nuts mailing list