[time-nuts] FW: Info for Vectron xx- 223A38L2 100 MHz oscillator?

[Wendler, John]

A colleague of mine brought in a Vectron oscillator.  I'm hoping someone
can tell me the pinout.

The first two letters on the part number could be CC-, or CO-, or OO-

The most probable part number is CO-223A38L2, and it is a 100 MHz
oscillator.  There is a 7 pin ring connector on the bottom of the can,
and an SMA output connector.  Can dimensions are about 2.02" x 2.02" x
4.02" and there are 4 threaded posts on the bottom to attach  the
oscillator to a chassis.

Does anyone have a datasheet or a list of the pins?  The Vectron site
does not go as far back as CO-223.

Thanks,

JPW

John P. Wendler, PE
 
Sr. Principal Engineer
Harris Corporation
1011 Pawtucket Blvd
Lowell, MA 01853
 
(O) 978-442-4822
(F) 978-442-4239
(M) 978-729-3040 (New)

This e-mail, including any attachments, may be confidential, privileged
or otherwise legally protected. It is intended only for the addressee.
If you received this e-mail in error or from someone who was not
authorized to send it to you, do not disseminate, copy or otherwise use
this e-mail or its attachments. Please notify the sender immediately by
reply e-mail and delete the e-mail from your system.