[time-nuts] HP 5065A Rubidium
Brian Kirby
kilodelta4foxmike at gmail.com
Sat Aug 15 22:20:44 UTC 2009
Mine is the 10811-60109.....serial number prefix is 2432.....
Bought the unit at The Huntsville Hamfest today. I knew the test
equipment dealer and he let me take the unit home to check it and so far
it appears to be OK. I had to adjust the coarse frequency before I
closed the loop, as it had high error voltage. I let it warm up about
30 minutes, and then adjusted it against a GPSDO, closed the loop, reset
the logic and I have continuous operation light and all the meter
readings are close to the recorded values. After an hour, I did a quick
drift test and I have 8x10E-12 in 2 minutes. Its 20 years old
according to the recorded meter readings.
Its just a rubidium oscillator. No digital clock or 1 PPS circuits.
Looks like I get to go back and pay the man. I love hamfest !
Bruce - I found the manual at Didier's site, but its not for the one I
have - but its a good place to start. I looked there before, But I
must have been too quick. Thanks.
Brian Kirby KD4FM
Dan Rae wrote:
> Brian Kirby wrote:
>>
>> Anybody know where I can find a PDF of the HP 5065A rubidium
>> frequency standard ?
> Brian, assuming you mean the manual, Artek Media have one for sale,
> but it is for the older versions. I have never been able to find one
> for the later versions that use the 10811 OCXO.
>
> Dan
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the time-nuts
mailing list