[time-nuts] HP 105B Modification
J. L. Trantham, M. D.
jltran at worldnet.att.net
Mon Dec 7 19:27:16 UTC 2009
The 5087 distribution amplifier designed to go with the 105B has an option
for a 5 to 10 MHz doubler card. You might look at doing something external.
Joe
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]On
Behalf Of Ed Palmer
Sent: Monday, December 07, 2009 11:04 AM
To: Time Nuts Mailing List
Subject: [time-nuts] HP 105B Modification
I have a late-model 105B Oscillator that's equipped with a 10811-60109
oscillator. It seems a shame to have that nice 10 MHz source without
having access to it. I was thinking of adding a buffer amp and bringing
out the 10 MHz signal. It shouldn't be too hard, but before I reinvent
the wheel, has anyone done this and do you have any suggestions or advice?
Thanks,
Ed
_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
More information about the time-nuts
mailing list