[time-nuts] Can a quartz crystal go off by 2% ?

Dr. David Kirkby david.kirkby at onetel.net
Tue Dec 29 13:58:36 UTC 2009


Rob Kimberley wrote:
> AFIK a lot of the clocks were radio controlled from MSF Rugby (now Anthorn,
> Cumbria). You would need to have some sort of automated system to
> accommodate daylight savings switchovers in Spring and Autumn. That said, I
> would have thought once synchronised, they would "tick" off the 50 Hz
> supply.
> 
> Rob Kimberley

The electricity bill always states the times are approximately 0030 to 0730 GMT.

Therefore, there is no change for daylight saving.

Dave

> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of Dr. David Kirkby
> Sent: 28 December 2009 23:22
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] Can a quartz crystal go off by 2% ?
> 
> I'm on the so-called 'Economy 7' electric in the UK, where I'm supposed to
> get 
> cheap electric from 0030 to 0730 - i.e. a 7 hour period when electricity
> demand 
> is low. I'm no longer heating by electric, but do run some computers 24/7.
> It's 
> not totally clear whether this saves me money or costs me money, as I pay a 
> higher price per unit during the expensive period, to compensate for the
> fact I 
> get it cheap for 7 hours. But I run some computers 24/7. I guess I should do
> the 
> maths and work it out. Apart from some heaters in the garage, which are very
> 
> rarely used, I no longer heat with it.
> 
> The time when the electric is cheap is set by a clock, which rotates
> once/day. 
> It says on it "quartz" somewhere, so it must be regulated by a crystal and
> not 
> from the 50 Hz supply, which would be pretty useless, as the clock would go 
> wrong if there was ever a power failure. The clock has not been changed in
> the 
> 17 years I've lived at my house, though the meter has on a couple of
> occasions.
> 
> The clock used to keep accurate, but now it looses time about 30
> minutes/day. I 
> wrote a computer program to predict when the electric is cheap, so we can 
> schedule when things like the washing machine, dishwasher, Hoover etc are
> used. 
> Even cooking to a certain extent, if it's convenient, though our life does
> not 
> revolve around the cheap electric.
> 
> I'm wondering if this is a mechanical fault in the clock, or whether the
> crystal 
> has developed a fault. It's clearly well outside any tolerance or aging
> process 
> of any crystal - even the cheapest ones.
> 
> I've not done any very extensive tests, but the error does not appear to be 
> constant. Hence every month or so I need to produce a new table, as my 
> predictions get less accurate with time. Since one can only read the clock
> to an 
> accuracy of about 15 minutes, it's not easy to know how far it is out.
> Sometimes 
> we hear the contactor go over, as this is supposed to then power the storage
> 
> heaters, which we no long use.
> 
> Dave
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 




More information about the time-nuts mailing list