[time-nuts] 1" 14 tpi UNS die

David C. Partridge david.partridge at dsl.pipex.com
Tue Jul 7 13:46:29 UTC 2009


I tried a 3/4" BSP but that didn't quite fit.  NPT is probably right ... 

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Robert Atkinson
Sent: 07 July 2009 14:07
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] 1" 14 tpi UNS die


Hi Dave,
A 3/4" pipe thread die will also work. Both NPT and BSP are 14tpi and have
approx 1" major diameter. Try taking your bit of pipe to a gas fitter.
Clarke sell a multi-die kit for £35 inc VAT,
http://www.machinemart.co.uk/shop/product/details/cht392-6-piece-pipe-thread
ing-kit

Regards,
Robert G8RPI.

--- On Tue, 7/7/09, David C. Partridge <david.partridge at dsl.pipex.com>
wrote:

> From: David C. Partridge <david.partridge at dsl.pipex.com>
> Subject: Re: [time-nuts] 1" 14 tpi UNS die
> To: "'Discussion of precise time and frequency measurement'" 
> <time-nuts at febo.com>
> Date: Tuesday, 7 July, 2009, 1:20 PM
> Panasonic VIC-100 GPS antenna ...
> 
> Dave
> 
> -----Original Message-----
> From: time-nuts-bounces at febo.com
> [mailto:time-nuts-bounces at febo.com]
> On
> Behalf Of Chuck Harris
> Sent: 07 July 2009 13:07
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] 1" 14 tpi UNS die
> 
> I don't recognize the size you are asking for.  What is your 
> application?
> 
> -Chuck Harris
> 
> David C. Partridge wrote:
> > Does anyone (preferably in the UK) have 1.0-14UNS-2A
> thread cutting
> > die they would be prepared to lend me (preferably a
> die nut type as I
> > don't have a die stock)?
> > 
> > Thanks
> > David Partridge
> > 
> > 
> > _______________________________________________
> > time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> > and follow the instructions there.
> > 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 


      

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




More information about the time-nuts mailing list