[time-nuts] AC cord or connector for 5061A

[J. L. Trantham]

I am aware of the connection issue but I can't find the connectors.  Are
they still available or should I change both the chassis connector and
mating connector to something that I can find?

Thanks,

Joe

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Tom Van Baak
Sent: Saturday, July 18, 2009 10:45 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] AC cord or connector for 5061A


> Does anyone know of a source for a power cord for the 5061A (or 5061B, 
> 5065A, etc.)?  I am looking for 3 cords or the connector that mates 
> with AC connector on the back.
> 
> The AC Cord is HP part number 1251-2457 and the connector that mates 
> with the connector on the back is a Cannon MS3106A-18-22SW.
> 
> Thanks in advance.
> 
> Joe

See if this helps.

http://www.leapsecond.com/museum/hp5065a/conn.htm

Best to open the bottom to make sure your unit has pins
that match the schematic.

/tvb


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.