[time-nuts] FE-5680A thermal management

[Leigh L. Klotz, Jr WA5ZNU]

For reference, Ridge Equipment has a photo of one of this year's crop of 
FE-5680A mounted to a large aluminum plate.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=330233071735
http://i43.tinypic.com/126cpcp.jpg
Leigh/WA5ZNU
> Almost all rubidium standards DO specify the use of some form of a heat sink.  For the FRK and M100 units this can be a heat sink with around 1" fins or just bolted to a metal plate or chassis.
>
> The military freq standard that had M100's in them had the unit mounted to a 5x5x.2" aluminum plate that was in turn bolted to the chassis.   My Efratom PTB-100 time bases for the Tektronix  TM500 mainframes have a large heat sink mounted to a FRK style oscillator.  
>
> LPROs are supposed to be mounted to a metal chassis (they usually come with a thermal pad attached to them).  I have seen them lose lock in free air.  I saw one mounted in a piece of cell phone equipment.  It was bolted to a large heat sink that formed most of the front of the enclosure.
>
> I have also seen FE-5680A's in their native habitat (again,  cell phone equipment).  They were mounted to a thick (1/8"?) PCB around 6x16".  The side of the PCB that the 5680 was bolted to had a solid ground plane.  The 5650A's had one side bolted to a metal chassis.
>
> ----------------------------------------
>
>
> _________________________________________________________________
> Hotmail® has ever-growing storage! Don’t worry about storage limits. 
> http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tutorial_Storage_062009
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>